Cisco TelePresence MCU 4200 Series Başlangıç Kılavuzu - Sayfa 4
Ağ Donanımı Cisco TelePresence MCU 4200 Series için çevrimiçi göz atın veya pdf Başlangıç Kılavuzu indirin. Cisco TelePresence MCU 4200 Series 15 sayfaları. Accessing conferences
Ayrıca Cisco TelePresence MCU 4200 Series için: Başlarken (18 sayfalar)
Sayfayı Yazdır
Calling in to conferences
When you dial into a conference you can connect directly to your conference or into a
menu that presents you with a series of options (called an auto attendant). From the
auto attendant you can select the conference you want to join.
You can join a conference/auto attendant in three ways. Using a:
hardware video endpoint
software video endpoint
audio-only telephone
Dialing in using a hardware video endpoint
Your system administrator will provide you with a number that will either connect you
to the auto attendant or connect you directly to your conference. If there is a PIN you
will be prompted to enter it.
On all endpoints you must always press the pound/hash key (#) after
i
entering a conference PIN.
Dialing in using a software video endpoint
If you have a webcam and microphone you can dial into a conference using a software
video endpoint from your computer.
You can dial into a conference using one of two software video endpoints: Cisco
TelePresence Movi and Cisco TelePresence ConferenceMe.
Dialing into a conference using Movi
This guide assumes that Movi and/or ConferenceMe are already
i
installed. See the individual products documentation for information on
how to install Movi and/or ConferenceMe.
Your system adminstrator will provide you with an address to use with Movi. The
address will take the format <e164_number>@domain.name or,
<conference_name>@domain.com.
To join the conference using Movi, type the address into the address bar of Movi and
press Enter. To enter a PIN, click the keypad icon and enter the PIN followed by a '#'.
Press Enter.
Calling in to conferences
4