Cisco TelePresence MCU 4500 Series Başlarken - Sayfa 9
Ağ Donanımı Cisco TelePresence MCU 4500 Series için çevrimiçi göz atın veya pdf Başlarken indirin. Cisco TelePresence MCU 4500 Series 18 sayfaları. Multipoint control units
Ayrıca Cisco TelePresence MCU 4500 Series için: Başlangıç Kılavuzu (15 sayfalar)
Sayfayı Yazdır
Step four: Discover the IP address of the MCU
1
To display the current status of the IP address, enter:
If you have DHCP enabled on your network and you are allowing the MCU to
acquire its address using DHCP, the IP address that has been acquired by
Ethernet Port A will be shown; if you have assigned a static IP address, that is the
address that will be shown.
2
Make a note of the IP address. You will use this to access the web interface of the
unit.
Initial configuration
status
9