Cisco UBR7246VXR Hızlı Başlangıç Kılavuzu - Sayfa 11
Ağ Donanımı Cisco UBR7246VXR için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Cisco UBR7246VXR 27 sayfaları. Universal broadband router
Ayrıca Cisco UBR7246VXR için: Kullanıcı Kılavuzu (7 sayfalar), Kurulum Kılavuzu (28 sayfalar), Donanım Kurulumu (25 sayfalar)
Sayfayı Yazdır
Figure 7
Installing the Rack-Mount Brackets in the Middle of the Chassis for Open or Relay-Type Racks
Rack-mount bracket
Installing the Cable-Management Brackets
If you are rack-mounting the chassis at the rear or middle of the chassis, both rack-mount brackets and the cable-management
bracket must be installed before the chassis is installed in the rack. See Figure 8 for cable management bracket locations.
To install the cable-management bracket, complete the following steps:
Align the cable-management bracket with the four right front threaded holes in the chassis.
Step 1
Thread four M4 x 6-mm Phillips flathead screws through the bracket and into the chassis, and use a number 2 Phillips
Step 2
screwdriver to tighten the screws.
Figure 8
Location of Cable Management Bracket
1
Cable-management
Rack-mount
bracket
Location of cable management bracket—rear mount
1
2
bracket
Rack-mount
bracket
Cable
management
bracket
Rack-mount
bracket
Location of cable management bracket—middle mount
2
11