Cisco UBR7246VXR Donanım Kurulumu - Sayfa 14

Ağ Donanımı Cisco UBR7246VXR için çevrimiçi göz atın veya pdf Donanım Kurulumu indirin. Cisco UBR7246VXR 25 sayfaları. Universal broadband router
Ayrıca Cisco UBR7246VXR için: Hızlı Başlangıç Kılavuzu (27 sayfalar), Kullanıcı Kılavuzu (7 sayfalar), Kurulum Kılavuzu (28 sayfalar)

Sayfayı Yazdır

Complete the following steps to connect the

Step 1

Ensure that there is no power going to the router.

Step 2

Strip approximately 0.75 in (2 cm) of shielding from the wire.

Step 3

Insert the stripped end of the wire into the open end of the ground lug, and crimp the lug.

Step 4

Slide a segment of heat shrink tubing over the exposed grounding lug and wire connection.

Step 5

Shrink the tubing in place, using a suitable heating device.

Step 6

Attach the grounding lug to the router using two M5 hex head screws. See Figure 9 on page 13.

Step 7

Connect the other end of the grounding wire to an appropriate ground source.

Connecting the Chassis to Power

Following are the procedures for connecting AC-input or DC-input power to your Cisco uBR7246VXR router.

Warning

This unit might have more than one power supply connection. All connections must be removed to de-energize the

unit. Statement 1028

Warning

Take care when connecting units to the supply circuit so that wiring is not overloaded. Statement 1018

Warning

This equipment has been designed for connection to TN and IT power systems. Statement 1007

Warning

Read the installation instructions before connecting the system to the power source. Statement 1004

Warning

Before working on equipment that is connected to power lines, remove jewelry (including rings, necklaces, and

watches). Metal objects will heat up when connected to power and ground and can cause serious burns or weld

the metal object to the terminals. Statement 43

Note

Detailed instructions for handling and replacing the Cisco uBR7246VXR router power supplies are contained in the

documents Cisco uBR7200 Series 550-Watt AC-Input Power Supply Replacement Instructions and Cisco uBR7200

Series 550-Watt DC-Input Power Supply Replacement Instructions at the following URL:

http://www.cisco.com/univercd/cc/td/doc/product/cable/cab_rout/cfig_nts/index.htm

Cisco uBR7246VXR router chassis to ground: