Epson 1680 - Expression Special Edition Manuel - Sayfa 19

Tarayıcı Epson 1680 - Expression Special Edition için çevrimiçi göz atın veya pdf Manuel indirin. Epson 1680 - Expression Special Edition 24 sayfaları. Color image, expression series
Ayrıca Epson 1680 - Expression Special Edition için: Kullanıcı Kılavuzu (7 sayfalar), Broşür ve Teknik Özellikler (24 sayfalar), Ürün Bilgileri (9 sayfalar), Buradan başlayın (4 sayfalar), Teknik Özellikler (2 sayfalar), Ürün Destek Bülteni (23 sayfalar), Manuel (11 sayfalar), Güncelleme (1 sayfalar), Ürün Destek Bülteni (40 sayfalar), Ürün Destek Bülteni (17 sayfalar), Ürün Destek Bülteni (3 sayfalar), Ürün Destek Bülteni (24 sayfalar), Garanti (2 sayfalar), Ürün Destek Bülteni (29 sayfalar), Ürün Destek Bülteni (8 sayfalar), Ürün Destek Bülteni (3 sayfalar), Ürün Destek Bülteni (14 sayfalar), Ürün Destek Bülteni (1 sayfalar), Ürün Destek Bülteni (5 sayfalar), Ürün Destek Bülteni (18 sayfalar), Ürün Destek Bülteni (12 sayfalar), Ürün Destek Bülteni (40 sayfalar), Ürün Destek Bülteni (11 sayfalar), Ürün Destek Bülteni (40 sayfalar), Ürün Destek Bülteni (22 sayfalar), Ürün Destek Bülteni (12 sayfalar), Ürün Destek Bülteni (21 sayfalar)

Power-on sequence

Always turn on your scanner or other SCSI devices before turning on the computer. If

your scanner is connected to a daisy chain, turn on the SCSI device which is connected

at the farthest end of the chain first, then proceed to the second farthest device and so

on before turning on your computer. If you attempt to use a SCSI device that has been

turned on after the computer, it may not work properly, or the computer may not work

properly.

Note:

If the scanner software is not yet installed, a dialog box or message prompting you to

set up the device and install the scanner software may appear when you turn on the

computer when the scanner is on. In this case, see the scanner software installation

instructions in Chapter 3, "Installing the Software" in your online Setup Guide to

complete the setup procedure.

Power-off sequence

Keep the following in mind every time you turn off your computer, scanner, and other

SCSI devices.

When you are finished using your system, turn off your computer first, then the

scanner and other SCSI devices in reverse order of the power-on sequence.

While using your computer, do not turn off any SCSI device which has a terminator

that is on.

Do not turn the scanner off and back on while using your computer; otherwise the

scanner may not work properly.

Connecting the scanner using the USB interface

To connect your scanner to your computer with the USB cable, your PC must be

pre-installed with Windows Millennium Edition, 98, or 2000, and have a working USB

port.

Your Apple Macintosh must be equipped with a PowerPC processor running Mac OS

8.5 or later, and have a working USB port.

Note for Macintosh Users:

Be sure to install the scanner software before connecting the scanner to your computer.

For details, see Chapter 3, "Installing the Software" in your online Setup Guide.

Understanding USB connections

USB Cables

USB cables enable you to connect or remove peripherals to and from your computer

easily, without having to shut down and restart the system each time a peripheral is

plugged in or unplugged. You do not have to set an ID number or a terminator.