Cisco UCS B200 M3 Kurulum ve Servis Notu - Sayfa 21

Ağ Donanımı Cisco UCS B200 M3 için çevrimiçi göz atın veya pdf Kurulum ve Servis Notu indirin. Cisco UCS B200 M3 28 sayfaları. Blade server
Ayrıca Cisco UCS B200 M3 için: Kurulum Kılavuzu (34 sayfalar), Kurulum ve Servis Notu (36 sayfalar), Kurulum ve Servis Notu (37 sayfalar), Manuel (8 sayfalar), Yükseltme Kılavuzu (21 sayfalar)

DIMMs per CPU

8 (Blue and black slots)

12 (Blue, black and beige slots)

Memory Performance

When considering the memory configuration of the blade server, there are several things to consider. For example:

• When mixing DIMMs of different densities (capacities), the highest density DIMM goes in slot 1 then in descending density.

• Besides DIMM population and choice, the selected CPU(s) can have some effect on performance.

• DIMMs can be run in a 1DPC, a 2DPC, or a 3DPC configuration. 1DPC and 2DPC can provide the maximum rated speed that

the CPU and DIMMs are rated for. 3DPC causes the DIMMs to run at a slower speed.

Memory Mirroring and RAS

The Intel CPUs within the blade server support memory mirroring only when an even number of channels are populated with DIMMs.

Furthermore, if memory mirroring is used, DRAM size is reduced by 50 percent for reasons of reliability.

Installing a Virtual Interface Card Adapter

The Cisco Virtual Interface Card (VIC) 1240 is a specialized adapter that provides dual 2 x 10 Gb of Ethernet/ or Fiber Channel over

Ethernet (FCoE) connectivity to each chassis. It plugs into the dedicated slot 1 connector only. It is currently the only card that can

be plugged into this connector and it will provide connectivity through either a 2100 series or 2200 series IOM.

Note

You must remove the adapter card to service it.

To install a Cisco VIC 1340 or VIC 1240 in the blade server, follow these steps:

Procedure

Step 1

Position the VIC board connector above the motherboard connector and align the captive screw to the standoff post on

the motherboard.

Step 2

Firmly press the VIC board connector into the motherboard connector.

CPU 1 installed slots

A0, B0, C0, D0, A1

A0, B0, C0, A1, B1, C1

A0, B0, C0, D0, A1, B1, C1

A0, B0, C0, D0, A1, B1, C1, D1

A0, B0, C0, D0, A1, B1, C1, D1,A2

A0, B0, C0, D0, A1, B1, C1, D1,A2, B2

A0, B0, C0, D0, A1, B1, C1, D1,A2, B2,

C2, D2

CPU 2 installed slots

E0, F0, G0, H0, E1

E0, F0, G0, E1, F1, G1

E0, F0, G0, H0, E1, F1, G1

E0, F0, G0, H0, E1, F1, G1, H1

E0, F0, G0, H0, E1, F1, G1, H1, E2

E0, F0, G0, H0, E1, F1, G1, H1, E2, F2

E0, F0, G0, H0?E1, F1, G1, H1, E2, F2,

E0, F0, G0, H0, E1, F1, G1, H1, E2, F2,

G2, H2