Epson 3490 - Perfection Photo Scanner Ürün Destek Bülteni - Sayfa 11

Tarayıcı Epson 3490 - Perfection Photo Scanner için çevrimiçi göz atın veya pdf Ürün Destek Bülteni indirin. Epson 3490 - Perfection Photo Scanner 40 sayfaları. Scanning application force quits on mac os 10.4
Ayrıca Epson 3490 - Perfection Photo Scanner için: Buradan başlayın (4 sayfalar), Kullanıcı Kılavuzu (6 sayfalar), Ürün Destek Bülteni (23 sayfalar), Güncelleme (1 sayfalar), Ürün Destek Bülteni (40 sayfalar), Ürün Destek Bülteni (24 sayfalar), Ürün Destek Bülteni (29 sayfalar), Ürün Destek Bülteni (8 sayfalar), Önemli Güvenlik Talimatları (4 sayfalar), Ürün Destek Bülteni (3 sayfalar), Ürün Destek Bülteni (14 sayfalar), Ürün Destek Bülteni (12 sayfalar), Ürün Destek Bülteni (11 sayfalar), Ürün Destek Bülteni (40 sayfalar), Ürün Destek Bülteni (22 sayfalar), Ürün Destek Bülteni (12 sayfalar), Ürün Destek Bülteni (21 sayfalar), Buradan başlayın (2 sayfalar)

Sayfayı Yazdır
Epson 3490 - Perfection Photo Scanner Ürün Destek Bülteni
Windows 2000 did not support the USB 2.0 hardware specification at the time it was first released.
Refer to Microsoft Knowledge Base Article - 319973 Universal Serial Bus 2.0 Support in Windows
2000 for more information.
Important Notes:
1.) Operating system must not be an upgrade from Windows 95.
2.) For Windows 2000 or XP you must be logged in as an administrator or as a user with
administrator rights before you can install and use EPSON software.
USB hubs must be self-powered and connected in a first-tier configuration for reliability
3.)
Macintosh OS
USB 1.1: Apple Macintosh computer (G3, G4, or iMac) with built-in USB port, running Mac® OS 8.5.1
to 9.2.2 with all USB extensions enabled. For OS X, you must have 10.1.3 or later.
FireWire (IEEE 1394): Power PC-equipped Macintosh or newer with Mac OS 8.6 to 9.2.2 with Apple's
FireWire 2.1 (or later) software installed. For OS X, you must have 10.1.3 or later.
USB 2.0 Hi-Speed: Not supported
Important Notes:
1.) You cannot use a serial interface to connect the scanner.
2.) Interface adapter cables (i.e. SCSI to USB, or USB to Serial, etc) are not supported.
3.) USB hubs must be self-powered and connected in a first-tier configuration for reliability.
4.) FireWire port must be compliant with this specification: IEEE 1394-2000 compatible.
Page 2 of 2