Cisco 2500 Series Kurulum Kılavuzu - Sayfa 6

Sunucu Cisco 2500 Series için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Cisco 2500 Series 12 sayfaları. Wireless controller
Ayrıca Cisco 2500 Series için: Yapılandırma Kılavuzu (19 sayfalar), Dağıtım Kılavuzu (23 sayfalar), Yapılandırma Kılavuzu (50 sayfalar), Başlangıç Kılavuzu (47 sayfalar)

Replacing the Cover

Figure 6

Screw

Step 3

Figure 7

Replacing the Cover

Take the following steps to replace the cover:

Step 1

Step 2

6 Installing Cisco AC and DC Power Supplies in Cisco 2500 Series Routers

Installing the Screw

Connect the power connector from the system board. Grasp the sides of the power

connector and gently push downward while rocking the connector side to side.

(See Figure 7.)

Connecting the Power Connector

Fan

Power connector

Fan connector

Position the two chassis sections, as shown in Figure 8.

Referring to Figure 8, press the two chassis sections together and ensure the following:

•

The top section ﬁts into the rear of the bottom section. (See A in Figure 8.)

•

The bottom section ﬁts into the front of the top section. (See B in Figure 8.)

•

Each side of the top and bottom sections ﬁts together. (See C in Figure 8.)

AC power supply