Cisco 700 series Genel Bakış - Sayfa 3

Sunucu Cisco 700 series için çevrimiçi göz atın veya pdf Genel Bakış indirin. Cisco 700 series 19 sayfaları. Using profiles
Ayrıca Cisco 700 series için: Hızlı Başlangıç Kılavuzu (8 sayfalar), Başlangıç Kılavuzu (27 sayfalar), Kullanıcı Kılavuzu (9 sayfalar), Yönetim Kılavuzu (36 sayfalar)

Proﬁle-Based User Name and Password

Remote users often have multiple service providers. Connecting to different service

providers might require different user names and passwords. Previous releases of Cisco 700

software used the same user name and password for all proﬁles when making outgoing

Point-to-Point Protocol (PPP) connections. Cisco 700 series router software Release 4.1(1)

allows different proﬁles to have different user names and passwords.

In previous releases, the set systemname command set the system prompt and the PPP user

name when making outgoing PPP connections. Different proﬁles can now use different user

names when dialing out. A new proﬁle level command, the set ppp clientname command,

has been created for this purpose.

Bandwidth Allocation Control Protocol and Bandwidth Allocation Protocol

The Bandwidth Allocation Control Protocol (BACP) and the Bandwidth Allocation

Protocol (BAP) deﬁne a set of rules to control dynamic bandwidth allocation gracefully by

managing the number of links in a PPP multilink bundle. BACP consists of a network

control protocol that negotiates once per PPP multilink bundle while BAP deﬁnes a set of

request and response messages to manage the links.

Cisco 700 series router software Release 4.0(2) already supports dynamic management of

both B channels with the demand feature. The implementation of BACP and BAP allows

Cisco 700 series routers to coordinate and negotiate the actual allocation and deallocation

of the second channel. The parameters are set using the demand command and the timeout

command.

BACP is only implemented on a BRI interface. A Multilink PPP has to be negotiated for

BACP to be functional.

If a data call is bumped to accommodate a voice call and if BAP negotiation is enforced,

the user might experience a short audio idle period before a B channel becomes available.

The user might not be able to connect the voice call if the peer declines to give up the link.

This happens when the set ppp bacp linkdrop negotiation command is set to ON.

Overview of Cisco 700 Series Routers 1-3

Product Features