Cisco APIC M4 Kurulum ve Servis Kılavuzu - Sayfa 27

Sunucu Cisco APIC M4 için çevrimiçi göz atın veya pdf Kurulum ve Servis Kılavuzu indirin. Cisco APIC M4 46 sayfaları.

Installing the Server

Figure 8: Attaching the Inner Rail to the Side of the Server

Front of server

Step 2

Open the front securing plate on both slide-rail assemblies. The front end of the slide-rail assembly has a spring-loaded

securing plate that must be open before you can insert the mounting pegs into the rack-post holes.

On the outside of the assembly, push the green-arrow button toward the rear to open the securing plate.

Figure 9: Front Securing Mechanism, Inside of Front End

Front mounting pegs

Rack post between mounting pegs and opened

securing plate

Step 3

Install the outer slide rails into the rack:

a) Align one slide-rail assembly front end with the front rack-post holes that you want to use.

The slide rail front-end wraps around the outside of the rack post and the mounting pegs enter the rack-post holes

from the outside-front.

Note

The rack post must be between the mounting pegs and the open securing plate.

b) Push the mounting pegs into the rack-post holes from the outside-front.

c) Press the securing plate release button, marked PUSH. The spring-loaded securing plate closes to lock the pegs in

place.

d) Adjust the slide-rail length, and then push the rear mounting pegs into the corresponding rear rack-post holes. The

slide rail must be level front-to-rear.

The rear mounting pegs enter the rear rack-post holes from the inside of the rack post.

Inner rail

Securing plate shown pulled back to the open

position

Cisco APIC M4/L4 Server Installation and Service Guide

Installing the Server in a Rack