Cisco AS5300 - Universal Access Server Hızlı Başlangıç Kılavuzu - Sayfa 12
Sunucu Cisco AS5300 - Universal Access Server için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Cisco AS5300 - Universal Access Server 25 sayfaları. Access server
Ayrıca Cisco AS5300 - Universal Access Server için: Ekler (10 sayfalar), Yapılandırma Kılavuzu (46 sayfalar), Manuel (21 sayfalar)
Sayfayı Yazdır
Connect a Modem for Remote Administrative Access (Optional)
To configure the Cisco AS5300 from a remote location, you will need an RJ-45-to-RJ-45 rollover cable and a modem adapter
(RJ-45-to-DB-25) for connecting a modem.
If you will not be using a modem to configure the Cisco AS5300 remotely, skip this procedure and go to Connect Power, page 13.
Note The cable and adapter are included. The modem is not included.
Connect the adapter labeled MODEM to your modem.
Step 1
Step 2
Connect the RJ-45-to-RJ-45 rollover cable to the adapter.
Connect the other end of the RJ-45-to-RJ-45 rollover cable to the port labeled AUX on the rear panel of the
Step 3
Cisco AS5300.
RJ-45-to-RJ-45
rollover cable
12
Universal access
server
Auxiliary port
(RJ-45)
(labeled AUX)
Modem
RJ-45-to-DB-25 adapter
(labeled MODEM)