Cisco AS5300 - Universal Access Server Yapılandırma Kılavuzu - Sayfa 43
Sunucu Cisco AS5300 - Universal Access Server için çevrimiçi göz atın veya pdf Yapılandırma Kılavuzu indirin. Cisco AS5300 - Universal Access Server 46 sayfaları. Access server
Ayrıca Cisco AS5300 - Universal Access Server için: Ekler (10 sayfalar), Hızlı Başlangıç Kılavuzu (25 sayfalar), Manuel (21 sayfalar)
Sayfayı Yazdır
Chapter 2
Configuring the Cisco AS5300 Network Access Server
Verifying the Default Gateway (Backhaul) Routing Protocol Configuration
To verify the configuration of the default gateway (backhaul) parameters:
1.
2.
Step 4—Confirming the Final Running Configuration
Enter the show running command on the Cisco AS5300 NAS CLI to see the final running
configuration:
Note
Your configuration will not look like this example. You must customize your configuration
for your own network environment. Additionally, most Cisco IOS software versions have
different default settings. However, this final configuration provides a good basis for
comparison.
hq-sanjose# show running
Building configuration...
Current configuration:
!
version 12.0
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
!
hostname hq-sanjose
Enter the show ip eigrp topology command on the Cisco AS5300 CLI to see the IP-EIGRP
topology table parameters:
hq-sanjose# show ip eigrp topology
IP-EIGRP Topology Table for process 10
Codes: P - Passive, A - Active, U - Update, Q - Query, R - Reply,
r - Reply status
P 10.1.3.0/24, 1 successors, FD is 46226176
via Redistributed (46226176/0)
P 10.1.2.0/24, 1 successors, FD is 128256
via Connected, Loopback0
P 10.1.4.0/24, 1 successors, FD is 46226176
via Redistributed (46226176/0)
P 10.1.254.0/24, 1 successors, FD is 46226176
via Connected, Dialer1
Enter the show running command on the Cisco AS5300 CLI to see the default gateway (backhaul)
parameters:
hq-sanjose# show running
Building configuration...
Current configuration:
!
---- snip ----
!
router eigrp 10
redistribute static
passive-interface Dialer1
network 10.0.0.0
no auto-summary
!
---- snip ----
Task 4—Setting Up Synchronous PPP Services
Cisco IOS Dial Services Quick Configuration Guide
2-43