Cisco AS5300 - Universal Access Server Manuel - Sayfa 14
Sunucu Cisco AS5300 - Universal Access Server için çevrimiçi göz atın veya pdf Manuel indirin. Cisco AS5300 - Universal Access Server 21 sayfaları. Access server
Ayrıca Cisco AS5300 - Universal Access Server için: Ekler (10 sayfalar), Hızlı Başlangıç Kılavuzu (25 sayfalar), Yapılandırma Kılavuzu (46 sayfalar)
Sayfayı Yazdır
Connecting the Console Terminal and Modem
Use the console terminal for local administrative access to the access server. You can only
connect a terminal to the console port. You can use the auxiliary port to connect a terminal or a
modem for remote access to the access server.
Connecting to the Console Port
To connect a terminal (an ASCII terminal or a PC running terminal emulation software) to the
console port on the access server:
Step 1 Connect the terminal using an RJ-45 rollover cable and an RJ-45-to-DB-25 or RJ-45-to-
DB-9 adapter. The adapters provided are labeled TERMINAL. Other types of adapters are not
included. (See .)
For additional information on rollover cable pinouts, see the appendix "."
Step 2 Configure your terminal or PC terminal emulation software for 9600 baud, 8 data bits, no
parity, and 2 stop bits.
Figure 3-12 Connecting the Console Terminal