Cisco Catalyst 4000 Son Kullanıcı Kılavuzu - Sayfa 4
Sunucu Cisco Catalyst 4000 için çevrimiçi göz atın veya pdf Son Kullanıcı Kılavuzu indirin. Cisco Catalyst 4000 6 sayfaları. For cisco business edition 4000
Ayrıca Cisco Catalyst 4000 için: Manuel (18 sayfalar), Kuruluma Hazırlanıyor (11 sayfalar), Hızlı Başlangıç Kılavuzu (8 sayfalar), Başlangıç Kılavuzu (31 sayfalar), Son Kullanıcı Kılavuzu (6 sayfalar)
Sayfayı Yazdır
Using Phone Features (Continued)
Park a Call
1. From a connected call, press Transfer
2. Dial * and the extension where you want to park the
call.
Example: If you want to park the call on extension
4501, dial *4501.
3. Press Transfer
again.
Retrieve a Parked Call
1. From any phone, dial *0* and the parked extension.
Example: Dial *0*4501 to retrieve the call parked on
extension 4501.
2. Pick up the handset.
Place an Intercom call
1. Dial the lead digit and the extension you want to
intercom with.
Contact your network administrator to know the lead
digit configured for intercom calls in your network.
2. Speak out the message.
The message is played in speaker mode on the dialed
extension.
3. To answer an intercom call, press the line key.
A dedicated two-way audio call is established.
Copyright © 2018 Cisco Systems, Inc. All rights reserved.
Cisco Business Edition 4000 End User Guide
Make a Paging Call
1. Dial the pilot number of the Paging Group.
.
Your system administrator can provide a list of available
paging numbers, if required.
2. Make the paging announcement.
The announcement is played in speaker mode on all
the phones available in the called Paging Group.
Add a Contact to Personal Directory
Personal Speed Dial entries can be accessed via the
Directory button under Personal Speed Dials.
1. Press Applications
2. Select My Phone Apps > Personal Speed Dial.
3. Press Add.
4. Enter the label and number.
5. Press Submit.
6. Press Exit until you reach My Phone Apps screen.
7. Select Reset.
Answer a Call Ringing on Another Phone
Phones in Your Pickup Group
An incoming call can be answered on any of the
extensions belonging to the same pickup group by
pressing the Pickup Softkey.
Phones Not in Your Pickup Group
An incoming call can be answered by any extension
belonging to different pickup groups by pressing GPickup
softkey followed by the pickup group number.
Log in to All Hunt Groups as a Static
Member
1. Press More (...).
2. Press HLog softkey. The phone logs in to all the Hunt
3. Press HLog again to log out of all Hunt Groups.
.
NOTE
Groups.
Log in to a Hunt Group as a Dynamic
Member
1. Press Applications
2. Select My Phone Apps > Voice Hunt Groups.
3. Scroll through the list of Hunt Groups and select the
4. Press Join.
5. Press Unjoin to log out of the Hunt Group.
Groups in which you are a permanent member.
: You cannot log in or log out of individual Hunt
.
required Hunt Group.
November 2018