Cisco Expressway CE1200 Cihaz Kurulum Kılavuzu - Sayfa 35
Sunucu Cisco Expressway CE1200 için çevrimiçi göz atın veya pdf Cihaz Kurulum Kılavuzu indirin. Cisco Expressway CE1200 42 sayfaları.
Ayrıca Cisco Expressway CE1200 için: Kurulum Kılavuzu (23 sayfalar)
Sayfayı Yazdır
Access the Expressway User Interface
•
Access the Expressway User Interface
This section describes how to access the Expressway web and CLI user interfaces. The interfaces are enabled
through the Install Wizard.
Using the Web UI
To log into the web user interface:
1. Open a browser window and in the address line type one of the following:
2. In the Login page, select Administrator login.
3. Login with username admin and your system password.
4. The Expressway Overview page is displayed.
More information
Detailed information about configuring and managing Expressway, including each page in the interface, is
provided in the Expressway online help and in the
Using the CLI
The command line interface is available over SSH and through the serial port by default:
1. Start an SSH session.
2. Enter the IP address or FQDN of the Cisco Expressway.
3. Log in with username admin and your system password.
Access the Expressway User Interface, on page 29
• IP address of the Cisco Expressway (for example, https://10.0.0.1). Enter the address as HTTPS.
• FQDN of the Cisco Expressway (for example, https://mydomain.example.com).
C H A P T E R
Cisco Expressway Administrator
Cisco Expressway CE1200 Appliance Installation Guide (14.0)
10
Guide.
29