Cisco Expressway CE1200 Cihaz Kurulum Kılavuzu - Sayfa 39
Sunucu Cisco Expressway CE1200 için çevrimiçi göz atın veya pdf Cihaz Kurulum Kılavuzu indirin. Cisco Expressway CE1200 42 sayfaları.
Ayrıca Cisco Expressway CE1200 için: Kurulum Kılavuzu (23 sayfalar)
Sayfayı Yazdır
Troubleshooting
Step 3
Check the Hypervisor checkbox, then press Disable.
Lag During Boot up Due to Power Characterization Check
The power characterization test is run only once when you plug in and power up the CE1200. If the power
characterization test continues to run, causing a lag in the boot time, ensure that it is disabled in the CIMC.
To do this:
Step 1
Log in to the CIMC (see
Step 2
Click the menu arrow in the top-left corner.
Step 3
Go to Chassis > Power management > Power Cap Configuration.
Step 4
Click Disable Power Characterization.
Step 5
Click Save Changes.
Connecting Using CIMC Serial Over
Lag During Boot up Due to Power Characterization Check
LAN).
Cisco Expressway CE1200 Appliance Installation Guide (14.0)
33