Cisco Firepower Management Centers Talimatlar Kılavuzu - Sayfa 10
Sunucu Cisco Firepower Management Centers için çevrimiçi göz atın veya pdf Talimatlar Kılavuzu indirin. Cisco Firepower Management Centers 20 sayfaları. Memory upgrade
Sayfayı Yazdır
Replacing the DIMMs
DIMM Location and Orientation
On the Firepower MC750 (Rev. 1 or Rev. 2), MC1500, and MC3500, the DIMM connectors are located
on the system board and are identified by silkscreen labels. You can also refer to the Quick Reference
Label on the inside of the chassis cover to assist in locating components.
Tip
Please note that only blue DIMM connectors are populated with modules.
DIMMs have a polarization notch on the mating edge to prevent incorrect insertion.
the polarization notch on a DIMM.
Figure A-8
1
Locating DIMMs in Firepower Management Centers
Use the following figures to identify the correct DIMM connectors for your memory upgrade
requirements identified in
starting from the center of the board.
•
•
•
Cisco Firepower Management Center 750, 1500, 2000, 3500, and 4000 Hardware Installation Guide
A-10
DIMM Showing Polarization Notch
Polarization notch
Table
Refer to
Figure A-9
for the location of the DIMM connectors on the MC750 (Rev. 1).
Refer to
Figure A-10
for the location of the DIMM connectors on the MC750 (Rev. 2).
Refer to
Figure A-11
for the location of the DIMM connectors on the MC1500 and MC3500.
Appendix A
Memory Upgrade Instructions for Firepower Management Centers
Polarization notch
— —
A-3. The silkscreen on the system board also displays the DIMM labels
Figure A-8
shows