Digitus DC-51101-LOCAL Kullanıcı Kılavuzu - Sayfa 2

Genişletici Digitus DC-51101-LOCAL için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Digitus DC-51101-LOCAL 2 sayfaları. Kvm extender
Ayrıca Digitus DC-51101-LOCAL için: Kullanıcı Kılavuzu (2 sayfalar)

Digitus DC-51101-LOCAL Kullanıcı Kılavuzu
Installation
KVM-L-PRO (Local)
Rear View
HD-15
3 in 1
VGA
custom
cable
cable
to " KVM-R-PRO"
DC 9V
Local
(Remote)
600mA
PC
Monitor
Adaptor
KVM-R-PRO (Remote)
Rear View
HD-15
VGA
cable
to " KVM-L-PRO"
DC 9V
Remote
(Local)
600mA
Monitor
Adaptor
1. Connect PC console port by using standard 3-in-1
cable to Local. (First connects PS/2 mouse, then
connects PS/2 keyboard and VGA connector).
2. Connect CAT5 cable to Local.
3. Connect CAT5 cable to Remote.
4. Connect keyboard, mouse and monitor to Local.
5. Connect keyboard, mouse and monitor to Remote.
6. Power on PC and Local.
7. Check the VGA quality by the monitor. If the video
quality is not good. Please use hot key of Remote to
adjust the video quality.
Operation
Change hot key in Local and Remote
Press hot key (default: Scroll Lock) twice to enter the
command mode, and press below key to select, and
press " ESC" key to exit command mode.
Key
Function
Scroll lock
" Scroll lock" is the hot key.
Num lock
" Num lock" is the hot key.
Shift (left/ right)
" Ctrl" (left/ right) is the hot key.
-4-
Mode switch of KVM-E-PRO
Front View
Remote
PS/2
PS/2
User
Local
Local
PS/2
PS/2
Mouse
Keyboard
Front View
PS/2
PS/2
KVM-E-PRO supports two modes:
Share mode:
Remote
RemotePS/2
PS/2
n The two users (Local and Remote) can access one PC
Keyboard
Mouse
base on a first-come, first-served policy.
n When the Local user accessing the PC, the Link LED
of
Remote will flash to remind the other user that it can' t
access now, and vice versa.
Local only mode:
n Only the Local user can access the PC. The Remote
user can' t access the PC (include the video).
n The Power LED of Local and Remote will flash to
remind both the Remote and the Local user that right
now only the Local can access the PC.
n Only the Local user can switch the access mode.
The Local user can switch the mode by two ways:
n Toggle the push button in the front panel of Local.
n Press hot key (default: Scroll Lock) twice to enter the
command mode, and press below key. After operation,
press " ESC" key to exit command mode.
Key
L
S
KVM-R-PRO
(Remote)
CAT5/E
(1000feet / 300m)
PC
KVM-L-PRO
Local
(Local)
User
Function
Switch to " Local only" mode.
Switch to " Share" mode.
-5-
Configure Video quality by Remote User
Our KVM Extender provides 2 ways to adjust video
quality: Manually or Automatically.
process the adjustment by hot key as
Press hot key (default: Scroll Lock) twice of Remote to
enter the command mode, and press below key to select
video adjustment function. Then press ↑ or ↓ key to adjust
the value. When finished, press " ESC" key to end adjust.
Key
Function
A
Adjust video quality Automatically.
N
Adjust video Gain.
E
Adjust video Equalization.
R
Adjust Red skew time.
G
Adjust Green skew time.
B
Adjust Blue skew time.
D
Set video and hot key to Default.
NOTE: All the video parameters have 32 levels to adjust.
You can also press & hold ↑ or ↓ to continually adjust
video, and if you adjust it to the last level then there will
be a " long" beep sound.

Troubleshooting

1. If the Power LED of Remote is not on, please make
sure power adapter is connected to Remote.
2. If no video signal is displayed on the monitor.
(1) Please check all of VGA cable and CAT5 cable
is loosened or disconnected.
(2) 3-in-1 cable was not attached to PC during boot
up process.
(3) Power adapter is not connected.
3. If video signal is foggy or un-clear, please check VGA
connector, or low the VGA resolution for long cable. It is
highly recommended to use " optimal CAT5 cable
length" to get the best video quality and not to waste
unnecessary CAT5 cable.
4. For the PC without PS/2 connector, please apply
PS/2-to-USB adapter to Local.
Trademarks:
All the companies, brand names, and product names
referred to this manual are the trademarks or registered
trademarks belonging to their respective companies.
-6-
The user can
follow.