Cisco SNS-3400 Series Yazılım Kurulumu - Sayfa 9
Sunucu Cisco SNS-3400 Series için çevrimiçi göz atın veya pdf Yazılım Kurulumu indirin. Cisco SNS-3400 Series 38 sayfaları.
Ayrıca Cisco SNS-3400 Series için: Bakım Kılavuzu (6 sayfalar)
Sayfayı Yazdır
Install Cisco ISE Software on Cisco SNS Appliances
Before You Begin
This section provides information on how you can prepare your site for safely installing the Cisco SNS-3515
or Cisco SNS-3595 appliance.
Safety Guidelines
Note
Before you install, operate, or service a Cisco SNS-3515 or Cisco SNS-3595 appliance, review the
Compliance and Safety Information for Cisco SNS-3415, Cisco SNS-3495, Cisco SNS-3515, and Cisco
SNS-3595 Appliances
Warning
Warning: IMPORTANT SAFETY INSTRUCTIONS
This warning symbol means danger. You are in a situation that could cause bodily injury. Before you work
on any equipment, be aware of the hazards involved with electrical circuitry and be familiar with standard
practices for preventing accidents. Use the statement number provided at the end of each warning to locate
its translation in the translated safety warnings that accompanied this device.
Statement 1071
Warning
Warning: To prevent the system from overheating, do not operate it in an area that exceeds the maximum
recommended ambient temperature of: 40° C (104° F).
Statement 1047
Warning
Warning: The plug-socket combination must be accessible at all times, because it serves as the main
disconnecting device.
Statement 1019
Warning
This product relies on the building's installation for short-circuit (overcurrent) protection. Ensure that the
protective device is rated not greater than: 250 V, 15 A.
Statement 1005
Warning
Installation of the equipment must comply with local and national electrical codes.
Statement 1074
for important safety information.
Install Cisco ISE Software on Cisco SNS Appliances
Before You Begin
Regulatory
9