Epson ES-1200C Pro PC Ürün Destek Bülteni - Sayfa 14
Tarayıcı Epson ES-1200C Pro PC için çevrimiçi göz atın veya pdf Ürün Destek Bülteni indirin. Epson ES-1200C Pro PC 19 sayfaları. Product support bulletin(s)
Ayrıca Epson ES-1200C Pro PC için: Kullanıcı Kılavuzu (11 sayfalar), Başlangıç Kılavuzu (31 sayfalar), Manuel (11 sayfalar), Başlayın (17 sayfalar), Ürün Destek Bülteni (5 sayfalar)
Sayfayı Yazdır
EPL-7000 cont.
[E] REMOVE CARD
You may have inserted a font card or cartridge while the printer was on line or
while the FEED light was on. Data still remains in the printer's buffer.
[E] RESELECT TRAY
The optional lower paper cassette is not installed and the INPUT option is set
to OPT or AUTO.
[S] RESET
The printer is being reset to the previous settings in the macro specified with
LOAD MACRO option in SelecType Level 1.
[S] ROM Check
The printer is checking ROM.
[E] SAVE MEMORY OVERFLOW
lf this message appears when you are trying to save a macro with the SAVE
MACRO option in SelecType Level 1, the printer does not have enough
memory to save any additional macros
[E] SERVICE REQ. CXXX
A controller error has been detected.
[E] SERVICE REQ. EOOXX
A print engine error has been detected.
XX= 03 Fusing Unit (low temp)
[E] SET FULL PRINT
This message may appear when you are trying to print graphics or a mix of
text and graphics.
[S] STANDBY MODE
When both CH P and CH S remain off for about thirty minutes, the printer
enters standby mode and this message appears.
[E] STARTUP ERROR
lf this message appears when you turn on the printer, the power may have
been turned off while the printer was performing a save or reset operation.
04 Main Drive Motor
05 Ozone Fan motor
06 Polygon Mirror Drive
09 HSync Signal
PSB No: P-0077
Page: 6 of 11