Cisco UCS 5100 Konfigürasyon - Sayfa 2

Sunucu Cisco UCS 5100 için çevrimiçi göz atın veya pdf Konfigürasyon indirin. Cisco UCS 5100 5 sayfaları. Uplink ethernet connection
Ayrıca Cisco UCS 5100 için: Kurulum (4 sayfalar), Kurulum (17 sayfalar), Ürün Yazılımı Kılavuzu (10 sayfalar), Manuel (14 sayfalar), Yükseltme Talimatları (10 sayfalar), Hızlı Başlangıç Kılavuzu (8 sayfalar), Yapılandırma Kılavuzu (6 sayfalar)

Sayfayı Yazdır
Cisco UCS 5100 Konfigürasyon
Components Used
The information in this document is based on the Cisco Unified Computing System.
The information in this document was created from the devices in a specific lab environment. All of the
devices used in this document started with a cleared (default) configuration. If your network is live, make sure
that you understand the potential impact of any command.

Network Diagram

A typical Cisco UCS topology is similar to this network diagram:
Conventions
Refer to the Cisco Technical Tips Conventions for more information on document conventions.
Configure
In this section, you are presented with the information to configure the features described in this document.
UCS Manager GUI
Complete these steps in order to use the UCS GUI to configure KVM console access to the blade server:
1.
In the navigation pane, click the Admin tab.
2.
Expand Communication Services, and choose Management IP Pool (ext−mgmt).
3.
Click Create Block of IP Addresses.