B2 Audio SLD5K Kullanıcı El Kitabı - Sayfa 7

Amplifikatörler B2 Audio SLD5K için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. B2 Audio SLD5K 12 sayfaları.

wiring layout

sld5k

We recommend to use minumum12 Ga speaker cables to acquire the intended performance.

Run the speaker cables from your speakers to the ampli er's mounting location.

Ensure these are ran separately and away from high current cables and if possible the RCA cables as well.

In all cases where cables are penetrating the vechile's chassis use grommets to protect the cable.

Connect the speaker wires according to the terminals on the speaker(s). Strip 3/8'' / 1 cm of insulation of the end of

each cable and twist the cable strands together tightly. Make sure there are no stray strands that could touch other

cables or terminals as it can cause a short circut.

Crimp spade plugs over the end of the cable or tin the ends with solder to provide a solid terminal.

Connect the cable ends to the ampli er as shown in the diagram. Note, the ampli er's speaker terminals are

internally bridged.

GND

B+

POWER

500A (External fuse)

Head unit

B+

REM

POWER

BATTERY

GND

GROUND*

* Keep ground as short as possible, no longer

than 20" (50 cm).