Cisco UCS B420 M3 Kurulum ve Servis Notu - Sayfa 5
Sunucu Cisco UCS B420 M3 için çevrimiçi göz atın veya pdf Kurulum ve Servis Notu indirin. Cisco UCS B420 M3 38 sayfaları. High performance blade server
Ayrıca Cisco UCS B420 M3 için: Yükseltme Kılavuzu (8 sayfalar)
Sayfayı Yazdır
cable, you can create a direct connection to the operating system and the BIOS running on a blade server. A KVM cable ships standard
with each blade chassis accessory kit.
Figure 2: KVM Cable for Blade Servers
1
Connector to blade server local console
connector
2
DB9 serial connector
Drive Replacement
Each blade has up to four front-accessible, hot plug capable, 2.5-inch SAS or SATA drive bays. Unused hard drive bays should
always be covered with cover plates to ensure proper cooling and ventilation.
You can remove and install hard drives without removing the blade server from the chassis.
The drives supported in this blade server come with the drive sled attached. Spare drive sleds are not available. A list of currently
supported drives is in the specification sheets at this
ucs-b-series-blade-servers/datasheet-listing.html
Before upgrading or adding a drive to a running blade server, check the service profile in Cisco UCS Manager and make sure the
new hardware configuration will be within the parameters allowed by the service profile.
To prevent ESD damage, wear grounding wrist straps during these procedures.
Caution
Removing a Blade Server Hard Drive
To remove a hard drive from a blade server, follow these steps:
3
VGA connection for a monitor
4
2-port USB connector for a mouse and keyboard
URL:http://www.cisco.com/c/en/us/products/servers-unified-computing/
5