Cisco UCS B420 M4 Kurulum ve Servis Notu - Sayfa 10

Sunucu Cisco UCS B420 M4 için çevrimiçi göz atın veya pdf Kurulum ve Servis Notu indirin. Cisco UCS B420 M4 38 sayfaları. Blade server

Installing a Blade Server

Figure 4: Removing a Slot Divider

Tip

Step 2

Grasp the front of the blade server and place your other hand under the blade to support it.

Figure 5: Positioning a Blade Server in the Chassis

Step 3

Open the ejector levers in the front of the blade server.

Step 4

Gently slide the blade into the opening until you cannot push it any farther.

Step 5

Press the ejectors so that they catch the edge of the chassis and press the blade server all the way in.

Step 6

Tighten the captive screw on the front of the blade to no more than 3 in-lbs. Tightening only with bare fingers

is unlikely to lead to stripped or damaged captive screws.

Cisco UCS B420 M4 Blade Server Installation and Service Note

To reinstall the slot divider, align it with the dimples in the slot top and bottom and slide it back

in until it clicks into place.

Installing a Blade Server