Cisco UCS B440-M1 Konfigürasyon - Sayfa 2

Sunucu Cisco UCS B440-M1 için çevrimiçi göz atın veya pdf Konfigürasyon indirin. Cisco UCS B440-M1 8 sayfaları. Bios policy configuring
Ayrıca Cisco UCS B440-M1 için: Manuel (12 sayfalar)

Sayfayı Yazdır
Conventions
Refer to the Cisco Technical Tips Conventions for more information on document conventions.

Background Information

BIOS policy is a policy that automates the configuration of BIOS settings. You can create one or more BIOS
policies which contain a specific grouping of BIOS settings that match the needs of a server or set of servers.
If you do not specify a BIOS policy for a server, the default BIOS settings are applied to the server. However,
these default BIOS settings can themselves be configured as per need. If a BIOS policy is specified, the policy
takes precedence over the BIOS default settings.
Any change made to the default BIOS settings does not affect a server that has a BIOS policy associated with
it because the BIOS policy takes precedence over the default BIOS settings. However, in the BIOS policy, if
the user leaves the value as platform−default, the UCS manager refers to that particular platforms BIOS
defaults (Servers > Policies > BIOS Defaults), and uses the value specified in the BIOS defaults.
In such cases it is possible for a user to achieve the usage of both BIOS policy and BIOS defaults. This is
required because some users might want to customize only a few settings in policy, and use BIOS default
values for the rest of the settings.
For example, if the user creates a BIOS policy 'test−policy' and specifies these values:
•
'disabled' for Turbo boost
•
'platform−default' for Hyper Threading
And the BIOS defaults for the platform have these values:
•
'enabled ' for Turbo boost
•
'enabled' for Hyper Threading
The net effect of this is Turbo boost set as 'disabled' and Hyper Threading set as 'enabled'.
When a configuration change is made via a BIOS policy or via default BIOS settings, the UCS manager
immediately pushes these changes to the CIMC buffer. These changes take effect only after the server is
rebooted.
Configure
These BIOS settings can be configured via a BIOS policy:
1.
Quiet boot
2.
Resume Ac on power loss
3.
Front Panel Lockout
4.
Turbo Boost
5.
Enhanced Intel Speedstep
6.
Hyper Threading
7.
Virtulization Technology
8.
Processor C3 Report
9.
Processor C6 Report
10.
VT for Directed IO
11.
Interrupt Remap
12.
Coherency Support