Cisco UCS C Series Hızlı Başlangıç Kılavuzu - Sayfa 10
Sunucu Cisco UCS C Series için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Cisco UCS C Series 12 sayfaları. Security manager 4.3
Ayrıca Cisco UCS C Series için: Sorun Giderme İpuçları (11 sayfalar), Yükseltme Kılavuzu (11 sayfalar), Yükseltme Kılavuzu (10 sayfalar), Kurulum (10 sayfalar), Kurulum Kılavuzu (19 sayfalar)
Sayfayı Yazdır
Recovery Media and Recovery Procedure
Note
Recovery Media and Recovery Procedure
Caution
Recovery media (2 DVDs) are provided with your new Bundle. Please take care that they are not
inadvertently discarded or lost.
There is no recovery partition.
Note
The purpose of the following procedure is to install Windows and Cisco Security Manager from the start;
Caution
installing Windows will delete all existing Windows files and data present in the Windows (C:\) partition
on the server. Files present in the Security Manager (D:\) partition will not be deleted. If required, back
up the files present on the server and ensure that you have the Security Manager database backup stored
on another server before proceeding.
If disk corruption or other hardware failure occurs, you can use the recovery media provided with your
new Bundle to restore the OS and Security Manager. Take the steps listed in the following procedure.
Procedure
From a laptop or other PC, log in to CIMC on the UCS server using Internet Explorer:
Step 1
https://<CIMC_IPAddress>/
Refer to the UCS documentation for setting up the CIMC IP address:
http://www.cisco.com/en/US/partner/products/ps10493/prod_installation_guides_list.html
Launch the KVM console from the CIMC web UI.
Step 2
Step 3
Insert the windows recovery media in the DVD drive of the laptop or other PC.
Step 4
Mount/Map the DVD drive as virtual media from the KVM console.
Step 5
Boot the UCS server into the EFI shell.
From the EFI shell execute following command to start Windows installation.
Step 6
fs1:\EFI\BOOT\BOOTX64.EFI
At the end of installation, enter the Windows administrator password.
Step 7
Download and install the UCS C220 M3 windows 2K8R2 x64 drivers for chipset and network devices.
Step 8
Refer to the UCS documentation for installing the Windows drivers:
http://www.cisco.com/en/US/partner/products/ps10493/products_user_guide_list.html
Step 9
Turn off the Windows firewall.
Cisco Security Manager 4.3 UCS Server Bundles Quick Start Guide
10
In this step, you must restart the computer. Restarting the Security Manager Daemon Manager
is not sufficient.
78-21007-01