Epson Expression 1600 Kurulum Kılavuzu

Tarayıcı Epson Expression 1600 için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Epson Expression 1600 6 sayfaları. Color image scanner
Ayrıca Epson Expression 1600 için: Kullanıcı Kılavuzu (7 sayfalar), Kullanıcı Kılavuzu (10 sayfalar), Şartname Sayfası (2 sayfalar), Ürün Destek Bülteni (23 sayfalar), Ürün Destek Bülteni (40 sayfalar), Ürün Destek Bülteni (17 sayfalar), Ürün Destek Bülteni (3 sayfalar), Ürün Destek Bülteni (24 sayfalar), Ürün Destek Bülteni (29 sayfalar), Ürün Destek Bülteni (8 sayfalar), Ürün Destek Bülteni (3 sayfalar), Ürün Destek Bülteni (14 sayfalar), Ürün Destek Bülteni (1 sayfalar), Ürün Destek Bülteni (5 sayfalar), Ürün Destek Bülteni (18 sayfalar), Ürün Destek Bülteni (12 sayfalar), Ürün Destek Bülteni (40 sayfalar), Ürün Destek Bülteni (11 sayfalar), Ürün Destek Bülteni (40 sayfalar), Ürün Destek Bülteni (22 sayfalar), Ürün Destek Bülteni (12 sayfalar), Ürün Destek Bülteni (21 sayfalar), Çevrimiçi Kılavuz (12 sayfalar)

Sayfayı Yazdır
Epson Expression 1600 Kurulum Kılavuzu
Epson Expression 1600 Scanner Setup
Unlocking Scanner and Transparency Adapter
Make sure your scanner and transparency adapter are unlocked. They should only be locked for storage or transport.
1
Unpack the scanner and attach the transparency adapter. Plug in the scanner and attach the cable from the scanner
2
to the appropriate port (FireWire, USB, or SCSI) on the computer or USB hub. If you purchased your computer
through Quick Ceph Systems, the scanner software will be installed and ready to use. Skip the software installation
section and go to "Setting Up The Scanner Interface".

Installing Scanner Software

Now that you have connected the
1
scanner to the computer, it is time
to install the scanner software.
Insert the "Scanning Tools" CD-
ROM found on
the back of the
Expression man-
ual. An icon will
appear on your
desktop. Double
click on this icon.
After the initial installation, the
3
Epson Screen Calibration applica-
tion will automatically open. Use
the arrows to adjust the image until
the two gray colors match each
other. Epson recommends a setting
of 1.8.
Open the Adobe Photoshop 5.0 LE
5
folder when the computer has
rebooted. Click once on the appli-
cation icon to select it. Go to the
File menu and select "Make Alias".
The computer will make an "alias"
(or "Shortcut") of the Photoshop
program. Place this alias on the
desktop.
http://www.quickceph.com/docs/1030Expression_Setup.pdf
The folder shown to the
2
right will open. Double
click on the icon labeled
"EPSON TWAIN Pro".
Click on the appropriate
language and then click
on the installer icon to
install the TWAIN soft-
ware. Click on "Restart"
when prompted.
4
Create a new folder on
6
the desktop by clicking on
the File menu an select-
ing "New Folder".
Rename the "Untitled
Folder" to "Scanned
Images". This folder will
be used to contain your
scanned X-rays.
You should also create
and place an alias of the
Quick Ceph program on
the desktop.
Page 1
Quick Ceph
When the computer boots up again, place the
PhotoShop LE CD-ROM into the computer to
install the software. Locate the Adobe
Photoshop 5.0 LE folder. Double click on this
folder and locate the "Install Photoshop® LE"
icon. Double click to install. Follow the installa-
tion directions, and restart when prompted.
Your desktop should resemble
the one shown above when the
software installation has concluded.
Doc ID# 1030Expression_Setup - Revision 12-1-00
®
Systems