Cisco UCS C220 M3 Yükseltme Kılavuzu - Sayfa 9

Sunucu Cisco UCS C220 M3 için çevrimiçi göz atın veya pdf Yükseltme Kılavuzu indirin. Cisco UCS C220 M3 10 sayfaları. Security manager 4.3
Ayrıca Cisco UCS C220 M3 için: Hızlı Başlangıç Kılavuzu (29 sayfalar), Yapılandırma Kılavuzu (33 sayfalar), Hızlı Başlangıç Kılavuzu (12 sayfalar)

Downgrade Scenario 2: Standalone Server

This scenario assumes the following conditions:

•

Use the following procedure to downgrade to earlier supported CPUs.

Power off the server.

Step 1

Replace the Intel E5-2600/E5-2400 v2 Series CPUs with the earlier supported CPUs.

Step 2

Use the CPU replacement procedures in the Installation and Service guide for your server:

C-Series Installation and Upgrade

Power on the server.

Step 3

Note

Optional: Downgrade your server CIMC.

Step 4

Use the CIMC firmware management procedures in the GUI or CLI

Configuration Guide

Step 5

Optional: Downgrade your server BIOS.

Use the CIMC firmware management procedures in the GUI or CLI

Configuration Guide

OL-28629-01

The C-Series server is in standalone mode.

The Cisco UCS Manager software is at the minimum version or later

Firmware Requirements, page

The C-Series server is using the BIOS/CIMC minimum version or later

Firmware Requirements, page

The C-Series server is using the Intel E5-2600/E5-2400 v2 Series CPUs.

The CIMC bundle, including the server CIMC and BIOS, is backward-compatible with earlier

supported CPUs, so the following firmware downgrade steps are optional.

for your release.

Cisco UCS C-Series Servers Upgrade Guide for Intel E5-2600 v2/E5-2400 v2 Series CPUs

Downgrading Cisco UCS C-Series Servers From Intel E5-2600/E5-2400 v2 Series CPUs

2).

Guides.

(seeMinimum Software and

Cisco UCS

Integrated Management Controller