Digitus DN-82010-1 Kullanıcı Kılavuzu - Sayfa 5
Medya Dönüştürücü Digitus DN-82010-1 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Digitus DN-82010-1 6 sayfaları. 10/100base-tx fast ethernet media converter
Ayrıca Digitus DN-82010-1 için: Manuel (2 sayfalar)
Sayfayı Yazdır
6. Connecting to TP, Fiber Device
Converter TP Port
10/100TX
Converter Fiber Port
100FX
7. Troubleshooting
If the media converter fails, isolate and correct the failure by determining
the answers to the following questions and then taking the indicated
action:
1. Is the power LED on the media converter illuminated?
NO
Is the power adapter the proper type of voltage and cycle frequency
for the AC outlet?
Is the power adapter properly installed in the media converter and in
the outlet?
Contact your local sales distributor for technical Support.
YES
Proceed to step 2.
2. Is the "Duplex/Link" LED illuminated on a port with twisted-pair
cable installed?
NO
Check the copper cables for proper connection.
YES
OFF = The media converter has selected half-duplex mode.
ON = The media converter has selected full-duplex mode.
If the mode is not correct, disconnect and reconnect the twisted pair
cable to restart the initialization process.
Proceed to step 3.
Default: 10/100Mbps Nway
a. Auto-Negotiation for Nway TP partner
b. Half-Duplex for non-Nway TP partner, Class II hub,
or 10Base-T device
100Mbps with duplex mode selectable:
a. Full-duplex for 100Fdx fiber link partner
b. Half-duplex for 100Hdx fiber link partner
FX duplex mode slide switch locates on the rear panel.