Cisco UCS Invicta C3124SA Kurulum Kılavuzu - Sayfa 28
Sunucu Cisco UCS Invicta C3124SA için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Cisco UCS Invicta C3124SA 40 sayfaları.
Ayrıca Cisco UCS Invicta C3124SA için: Yükseltme Prosedürü (16 sayfalar), Yükseltme Prosedürü (20 sayfalar)
Sayfayı Yazdır
Installing the Cisco UCS Invicta C3124SA Appliance In a Rack
Change the IP address and Mask to those provided by the customer.
Step 3
Do not change the CIMC mode or passwords. Cisco Technical Support will not have access to the device
Caution
if configurations are changed.
Repeat Steps 1-3 for each SSR and SSN in the Cisco UCS Invicta Scaling System.
Step 4
Customers need to create a record of all the IP addresses used, using labels or other means.
Note
After Steps 1-4 are completed, the management port is ready to be connected to the customer network.
Connectivity
There are four kinds of connectivity for the Cisco UCS Invicta C3124SA Appliance, as described in
Table
Cables are not included and need to be ordered separately.
Note
Connectivity Type
Fibre Channel
Ethernet over Fiber (iSCSI only) N2XX-AIPCI01 dual-port 10Gb
Cisco UCS Invicta C3124SA Appliance Installation Guide
2-8
2-1.
Table 2-1
Cisco UCS Invicta C3124SA Connectivity
Chapter 2
Installing the Cisco UCS Invicta C3124SA Appliance
Invicta Connectivity
N2XX-AQPCI05 dual-port 8Gb
Fibre Channel adapter comes
with preinstalled 8G SW SFP+
transceivers
Compatible cable: 50 μm
multimode fiber cable
SFP+ Ethernet adapter
Compatible cable: 50 μm
multimode fiber cable
Upstream Switch Connectivity
Short-wave 850nm 2G, 4G,
•
8G Fibre Channel.
Cisco DS-SFP-FC8G-SW
•
Cisco MDS 9000 and Cisco
•
Nexus series switches with
Unified Ports set to FC
mode.
rd
Compatible 3
party Fibre
•
Channel switches are listed
in the Cisco UCS Hardware
and Software
Interoperability Documents.
The Cisco UCS Invicta
Note
3124SA Appliance
comes with preinstalled
8G FC transceivers.
Compatible optical transceiver:
SFP-10G-SR
OL-31369-01