Cisco 2621XM Kullanıcı Kılavuzu - Sayfa 25
Ağ Geçidi Cisco 2621XM için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Cisco 2621XM 48 sayfaları. Non-proprietary security policy
Ayrıca Cisco 2621XM için: Operasyonlar (25 sayfalar), Kullanıcı Kılavuzu (20 sayfalar)
Figure 18
Port adapter
lever
The NPE-400 uses an RM7000 microprocessor that operates at an internal clock speed of 350 MHz. The
NPE-400 uses SDRAM for storing all packets received or sent from network interfaces. The SDRAM
memory array in the system allows concurrent access by port adapters and the processor. The NPE-400
has three levels of cache: a primary and a secondary cache that are internal to the microprocessor, and a
tertiary 4-MB external cache that provides additional high-speed storage for data and instructions.
The Cisco 7206VXR router comes equipped with one 280W AC-input power supply. (A 280W DC-input
power supply option is available.) A power supply filler plate is installed over the second power supply
bay. A fully configured Cisco 7206VXR router operates with only one installed power supply; however,
a second, optional power supply of the same type provides hot-swappable, load-sharing, redundant
power.
Cisco 7206 VXR NPE-400 Module Interfaces
The interfaces for the router are located on the front panel Input/Output (I/O) Controller, with the
exception of the power switch and power plug. The module has two Fast Ethernet (10/100 RJ-45)
connectors for data transfers in and out. The module also has two other RJ-45 connectors for a console
terminal for local system access and an auxiliary port for remote system access or dial backup using a
modem.
Figure 19
panel displays whether or not the router is booted, if the redundant power is attached and operational,
and overall activity/link status.
Cisco 1721, 1760, 2621XM, 2651XM, 2691, 3725, and 3745 Modular Access Routers and 7206-VXR NPE-400 Router FIPS 140-2 Non-Proprietary
OL-6083-01
The Cisco 1721, 1760, 2621XM, 2651XM, 2691, 3725, 3745, and 7206 VXR NPE-400 Routers
The Cisco 7206 VXR NPE-400 Router
Cisco 7200
Series
I/O controller
PC card slots
shows the front panel LEDs, which provide overall status of the router operation. The front
Port adapters
Auxiliary
Optional Fast Ethernet port
(MII receptacle and RJ-45 receptacle)
ETHERNET-10BFL
FAST ETHERNET INPUT/OUTPUT CONTROLLER
Console
port
port
25