Cisco 2621XM Kullanıcı Kılavuzu - Sayfa 34

Ağ Geçidi Cisco 2621XM için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Cisco 2621XM 48 sayfaları. Non-proprietary security policy
Ayrıca Cisco 2621XM için: Operasyonlar (25 sayfalar), Kullanıcı Kılavuzu (20 sayfalar)

Sayfayı Yazdır

The Cisco 1721, 1760, 2621XM, 2651XM, 2691, 3725, 3745, and 7206 VXR NPE-400 Routers

Figure 23

NM -H DV

BA NK 4

BA NK 3

To apply tamper-evidence labels to the Cisco 7206 VXR NPE-400:

Step 1

Clean the cover of any grease, dirt, or oil before applying the tamper evidence labels. Alcohol-based

cleaning pads are recommended for this purpose. The temperature of the router should be above 10°C.

Step 2

Place the first label on the router as shown in

that the one half of the label covers the enclosure and the other half covers the 7206 VXR NPE-400

Input/Output Controller.

Place the second label on the router as shown in

Step 3

over the Flash PC Card slots on the Input/Output Controller.

Place the third label on the router as shown in

Step 4

so that one half of the label covers the enclosure and the other half covers the port adapter slot 1.

Place the fourth label on the router as shown in

Step 5

so that one half of the label covers the enclosure and the other half covers the port adapter slot 2.

Place the fifth label on the router as shown in

Step 6

that one half of the label covers the enclosure and the other half covers the port adapter slot 3.

Place the sixth label on the router as shown in

Step 7

so that one half of the label covers the enclosure and the other half covers the port adapter slot 4.

Place the seventh label on the router as shown in

Step 8

so that one half of the label covers the enclosure and the other half covers the port adapter slot 5.

Place the eighth label on the router as shown in

Step 9

so that one half of the label covers the enclosure and the other half covers the port adapter slot 6.

Place the ninth label on the router as shown in

Step 10

so that one half of the label covers the enclosure and the other half covers the network processing engine.

Cisco 1721, 1760, 2621XM, 2651XM, 2691, 3725, and 3745 Modular Access Routers and 7206-VXR NPE-400 Router FIPS 140-2 Non-Proprietary

Cisco 3725 and Cisco 3745 Tamper Evidence Label Placement

BA NK 2

BA NK 1

BA NK 0

SEE MAN

UAL BEF

DS U

ORE INS

TAL LAT ION

56K

SEE MAN

UAL BEF

ORE INS

DS U

TAL LAT ION

56K

SEE MAN

UAL BEF

ORE INS

TAL LAT ION

Figure

24. The tamper evidence label should be placed so

Figure