Cisco 2800 Series Hızlı Başlangıç Kılavuzu - Sayfa 23

Ağ Geçidi Cisco 2800 Series için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Cisco 2800 Series 47 sayfaları. Cisco ios software configuration
Ayrıca Cisco 2800 Series için: Hızlı Başlangıç Kılavuzu (13 sayfalar), Veri Sayfası (8 sayfalar), Uygulama Notu (41 sayfalar), Hızlı Başlangıç Kılavuzu (45 sayfalar), Konfigürasyon (10 sayfalar), Genel Bakış (27 sayfalar), Veri Sayfası (5 sayfalar), Veri Sayfası (20 sayfalar), Yapılandırma (32 sayfalar)

Install the plastic covers over the terminals. (See Figure 19 or Figure 20.)

Step 6

Warning

The safety cover is an integral part of the product. Do not operate the unit without the safety cover installed.

Operating the unit without the cover in place will invalidate the safety approvals and pose a risk of fire and

electrical hazards. Statement 117

Organize and secure the wires using cable ties as shown in Figure 19 or Figure 20. Make sure that the wires do not

Step 7

project above or below the front panel of the router.

Step 8

Turn on power to the DC circuit. Be sure to remove tape used to secure the circuit-breaker switch in the OFF position.

Figure 19

DC Wire Routing and Attachment for Cisco 2811 Routers

Plastic covers

Figure 20

DC Wire Routing and Attachment for Cisco 2821 and Cisco 2851 Routers

Plastic covers

2 4 - 6 0 V -

- - 8 A

C O N S O

L E

A U X

2 4 - 6 0 V

- - - 1 2 A

Cable tie

From DC

power

source

Cable tie

From DC

power

source