Acuity Brands HOLOPHANE Utility Series Kurulum ve Bakım Kılavuzu - Sayfa 3
Aydınlatma Ekipmanları Acuity Brands HOLOPHANE Utility Series için çevrimiçi göz atın veya pdf Kurulum ve Bakım Kılavuzu indirin. Acuity Brands HOLOPHANE Utility Series 8 sayfaları. Utility series led retrofit kit
Sayfayı YazdırHOLOPHANE
Utility Arlington® LED
1. INTRODUCTION
1.1 Product Description.
This post top LED retrofit kit will convert an existing M housing
(hinged module door) postop luminaire to LED source.
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
1.2 Alternate Information Sources.
Field Service Department
P.O. Box 3004
Newark, OH 43058-3004
®
ARUE3, JFUE3, AND PTUE3
Utility Series LED Retrofit Kit
Utility Jefferson® LED
Holophane
(866) 759-1577
Utility Taft LED
2. INSTALLATION
2.1 Tools and Material Required.
Table 1. Installation Tools and Materials
DESCRIPTION
USE
Flat-end Screwdriver
Installation of electrical wiring
3/8" set screws in pole fitter
3/16" Allen Wrench
Torque Wrench
Set screws
5/16" hex driver or socket
Fasteners
3/8" hex driver or socket
Fasteners
OPTICS ORIENTATION NOTES
Some of the fixtures in this series are equipped with optical
components that produce distributions of light that are not symmetric
and are intended to be aimed by orienting the prismatic refractor a
specific direction. There is a molded-in "Street Side" marking on the
glass or plastic refractor, align this with the Street Side" marking on the
LED casting and point this side toward the street. See figure 7 and 8
for aiming details.
Installation and
Maintenance
Manual
GR1955, GR1956, GR1957
IM-431-A