Cisco 3600 Series Yapılandırma Kılavuzu - Sayfa 25

Ağ Geçidi Cisco 3600 Series için çevrimiçi göz atın veya pdf Yapılandırma Kılavuzu indirin. Cisco 3600 Series 36 sayfaları. Memory upgrade
Ayrıca Cisco 3600 Series için: Ürüne Genel Bakış (10 sayfalar), Yükseltme Talimatları (30 sayfalar), Kullanıcı El Kitabı (17 sayfalar), Uygulama Notu (41 sayfalar), Kullanıcı Kılavuzu (25 sayfalar), Ekler (15 sayfalar), Kullanıcı Kılavuzu (7 sayfalar), Manuel (5 sayfalar), Yapılandırma Notu (23 sayfalar), Yapılandırma Notu (18 sayfalar), Yapılandırma Notu (25 sayfalar)

Sayfayı Yazdır

Configure a Trunk Connection

To configure virtual trunk connections in a VoIP network, use the following commands beginning in

global configuration mode:

Step

Note

established.

Configure Voice over IP for Microsoft NetMeeting

Voice over IP can be used with Microsoft NetMeeting (Version 2.x) when the Cisco 3600 or Cisco

2600 series router is used as the voice gateway. Use the latest version of DirectX drivers from

Microsoft on your PC to improve the voice quality of NetMeeting.

Configure Voice over IP to Support Microsoft NetMeeting

To configure Voice over IP to support NetMeeting, create a VoIP peer that contains the following

information:

•

Command

dial-peer voice number pots

destination-pattern [+]string

port slot-number/subunit-number/port

dial-peer voice number voip

session target ipv4:destination-address

destination-pattern [+]string

exit

configure terminal

voice-port

slot-number/sub-unit-number/port

connection trunk string

This configuration must be performed on both end routers for the trunk connection to be

Session Target—IP address or DNS name of the PC running NetMeeting

CODEC—g711ulaw or g711alaw

Configure Voice over IP for Microsoft NetMeeting

Purpose

Enter dial-peer configuration mode and define a tag

number for a POTS dial peer.

Specify the telephone number associated with the

POTS dial peer.

Associate the POTS dial peer with a specific voice

port on the Cisco end router.

Define a tag number for a VoIP dial peer.

Identify the IP address of the appropriate port on

the destination end router.

Identify the destination pattern (telephone number)

of the VoIP dial peer call leg on the destination end

router.

Exit dial-peer configuration mode.

Enter global configuration mode.

Enter voice-port configuration mode.

Specify a straight tie-line connection (virtual trunk

connection). The string argument refers to the

destination pattern (telephone number) configured

for the destination VoIP dial peer. The value you

configure for the connection trunk command must

exactly match the value configured for the VoIP

dial peer.

Configuring Voice over IP for the Cisco 3600 Series VC-37