Cisco ASR 9000 Series Manuel - Sayfa 14

Ağ Geçidi Cisco ASR 9000 Series için çevrimiçi göz atın veya pdf Manuel indirin. Cisco ASR 9000 Series 24 sayfaları. Line card
Ayrıca Cisco ASR 9000 Series için: Ağ Ayarlarını Yapılandırma (26 sayfalar), Yapılandırma Kılavuzu (46 sayfalar), Yapılandırma Kılavuzu (50 sayfalar), Yapılandırma (46 sayfalar), Manuel (44 sayfalar), Hızlı Referans Kılavuzu (7 sayfalar)

Sayfayı Yazdır
Cisco ASR 9000 Series Manuel

show controllers backplane ethernet location clients

show controllers backplane ethernet location clients
To display information about client applications in a particular location, use the show controllers backplane
ethernet location clients command in EXEC mode.
show controllers backplane ethernet location node-id clients client-id {statistics| all}
Syntax Description
node-id
client-id statistics
client-id all
Command Modes
EXEC
Command History
Release
Release 3.7.2
Usage Guidelines
Examples
The following example shows the output from the show controllers backplane ethernet location clients
command, which displays detailed information about the backplane client application statistics:
RP/0/RSP1/CPU0:router# show controllers backplane ethernet location 0/0/CPU0 clients all
------------------------------------------------------------------------------
FE0_0_CPU0
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference
14
Identifies the node whose local client applications information you want to
display. The node-id argument is entered in the rack/slot/module notation.
Note
Displays a list of client statistics for the specified client ID. Range is from 1
through 22.
Displays a list of all client applications and their IDs.
Intf
Client ethernet
Name
server id
1
2
3
4
5
6
7
8
9
10
11
12
13
14
Internal Ethernet Control Network Commands on the Cisco ASR 9000 Series Router
Enter the show platform command to obtain the
node-id
Modification
This command was introduced.
Client
Process Id
12307
28726
0
0
0
0
0
16415
0
12312
12305
0
0
Card Configuration Protocol
0
Description
QNX network manager
Group services
Reserved for Attach
Plugin controller
Designated SC
HFR H/W diags
IP packet handler
Redundancy controller
HFR Virtual console
HFR Virtual terminal
Control ethernet echo
Control eth echo reply
Reserved for Attach
OL-24762-01