Cisco AT&T 3G MicroCell Kullanıcı Kılavuzu - Sayfa 11
Ağ Geçidi Cisco AT&T 3G MicroCell için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Cisco AT&T 3G MicroCell 20 sayfaları. Wireless signal booster
Ayrıca Cisco AT&T 3G MicroCell için: Kullanıcı Kılavuzu (20 sayfalar), Başlangıç Kılavuzu (11 sayfalar), Hızlı Başlangıç Kılavuzu (8 sayfalar)
Sayfayı Yazdır
Option C
UsethisoptionifyouhaveamodemandaWi-Firouterandwanttoprioritizeyour3GMicroCellconnection
because other Internet use impacts the 3G MicroCell performance.
1
Open
Port
Wi-Fi Router
Remove the sticker that covers the rear panel of your 3G MicroCell.
To ensure success, it is important to complete the steps below in order.
Thissetupprioritizes3GMicroCellconnectionsovercomputerconnections.
1. Connect one end of an
to the port labeled
2. Take the
yellow Ethernet cable
'Ethernet'
on the 3G MicroCell and the other end to the
3. Now,
turn off power
equipment in the following order:
a) Modem
b) 3G MicroCell (Connect one end of the
and connect the other end to an available
c) Wi-Fi Router
Priority Mode Configuration
AT&T 3G MicroCell™
1
Ethernet cable
to your
'Computer'
on your 3G MicroCell.
that came with your 3G MicroCell and connect one end to the yellow port labeled
to your current internet equipment.
AC Power Adapter
2
3
Power
Internet port
on your
Wi-Fi router
Ethernet port on your
Wait one
minute, then
to the connector labeled
AC
outlet.)
Ethernet Cable
(Included)
2
and the other end of the cable
modem.
turn on power
to your Internet
'Power'
on the 3G MicroCell
Advance to page 12.
Open Port
Modem
11