Cisco ATA 188 Genel Bakış Kılavuzu

Ağ Geçidi Cisco ATA 188 için çevrimiçi göz atın veya pdf Genel Bakış Kılavuzu indirin. Cisco ATA 188 11 sayfaları. Analog telephone adaptor
Ayrıca Cisco ATA 188 için: Konfigürasyon (28 sayfalar), Genel Bakış (11 sayfalar), Kurulum Talimatları (6 sayfalar)

Sayfayı Yazdır

Cisco Analog Telephone Adaptor Overview

This section describes the hardware and software features of the Cisco Analog Telephone Adaptor

(Cisco ATA) and includes a brief overview of the Skinny Client Control Protocol (SCCP).

The Cisco ATA analog telephone adaptors are handset-to-Ethernet adaptors that allow regular analog

telephones to operate on IP-based telephony networks. Cisco ATAs support two voice ports, each with

an independent telephone number. The Cisco ATA 188 also has an RJ-45 10/100BASE-T data port.

This section covers the following topics:

•

Overview of the Skinny Client Control Protocol, page 1-2

Hardware Overview, page 1-3

•

Software Features, page 1-5

Installation and Configuration Overview, page 1-9

•

Figure 1-1

The Cisco ATA, which operates with Cisco voice-packet gateways, uses broadband pipes deployed

through digital subscriber line (DSL), fixed wireless, cable modem, and other Ethernet connections.

The term Cisco ATA refers to both the Cisco ATA 186 and the Cisco ATA 188, unless otherwise stated.

Note

This guide provides information about the SCCP image for the Cisco ATA. The features and functionality

described in this guide do not necessarily pertain to the features and functionality provided by the other

protocol loads available for the Cisco ATA. Each protocol load has its own administrator's guide. If you are

looking for information about the behavior of the Cisco ATA for a protocol other than SCCP, please refer to

the administrator's guide specific to that protocol.

OL-4652-01

Cisco ATA Analog Telephone Adaptor

C IS C O A

T A 1 8 6

A N A L O G

T E L E PH

O N E A D

A PT O R

Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator's Guide for SCCP (version 3.0)

C H A P T E R

1-1