Cisco D-PCG1000 PowerKEY CAS Veri Sayfası

Ağ Geçidi Cisco D-PCG1000 PowerKEY CAS için çevrimiçi göz atın veya pdf Veri Sayfası indirin. Cisco D-PCG1000 PowerKEY CAS 4 sayfaları. Conditional access system gateway

Sayfayı Yazdır

Cisco D-PCG1000 PowerKEY CAS Veri Sayfası

Model D-PCG1000 PowerKEY CAS Gateway

The Model D-PCG1000 PowerKEY

performs real-time PowerKEY entitlement control message (ECM) generation and

distribution. The PCG operates within the DVB

The PCG acts as an Entitlement Control Message Generator (ECMG) that uses the

standard ECMG-to-Simulcrypt Synchronizer (SCS) interface. Optionally, the PCG can

also perform Event Information Scheduler (EIS) functions using the EIS-to-SCS interface.

By using these standard interfaces, the PCG can be integrated with headend equipment from

multiple vendors. Using the PCG allows you to run PowerKEY Conditional Access along with other

conditional access systems in a mixed environment.

The Digital Network Control System (DNCS) configures the PCG and manages sessions on the

PCG in much the same way as on QAM devices. However, unlike the QAM devices, a single PCG

device can provide ECM generation for 1000 digital broadcast sessions.

The PCG is a PC-based product (preloaded with Red Hat Linux OS.) A 1U rack-mounted PC is

used, appropriate to a cable headend environment. Two Ethernet connections are available.

Figure 1.

Model D-PCG1000 PowerKEY CAS Gateway (image may vary from actual product and specification)

Features

●

Creates Integrated PowerKEY Conditional Access ECMs

●

Complies with the Simulcrypt 3.0 Interface

●

Supports 1000 Broadcast Sessions at a 4- to 15-second cryptocycle

●

Reports all DVB ECMG-to-SCS and EIS-to-SCS errors using alarms to the DNCS. An alarm

is generated if the SCS stops requesting new ECMs

●

Contains two 10/100/1000BASE-T network interfaces for remote provisioning, control,

status monitoring, and alarms

Conditional Access System Gateway (PCG)

Simulcrypt headend reference model.

Data Sheet

Page 1 of 4