Digitus professional DN-651107 Kullanıcı Kılavuzu - Sayfa 3

Anahtar Digitus professional DN-651107 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Digitus professional DN-651107 7 sayfaları. Industrial 5-port gigabit switch

Digitus professional DN-651107 Kullanıcı Kılavuzu

Power connection

This unit provides a 4 pin terminal block. It can be operated using 12-
56VDC/18-36VAC power source. Always make sure your input voltage is
within this supported voltage range.
To connect power: This unit supports two power inputs. Follow the printed
polarity for +V1-, +V2- and ground. Connect positive wires to V+, connect
negative wires to V-, and connect a neutral wire to the ground screw.
+V1- is for power input one connection.
+V2- is for power input two connection.
Power connecting procedure:
 STEP 1 –
 STEP 2 –
 STEP 3 –
WARNING:
Always SHUT OFF power source to connect power wire.
WARNING:
Any exceeded input voltage will not make this unit function and may
damage this unit.
+V1- +V2-
Take out 4 pin terminal block located in the included
mounting kit package.
Connect power wires to +V1- or +V2- with
corresponding polarity. Connect the grounding wire
to the ground screw.
Plug into terminal block socket shown above.
Polarity needs to match V+ and V-.