Argos Hallingford Gloss 814/5091 Montaj Talimatları Kılavuzu - Sayfa 11
İç Mekan Mobilyaları Argos Hallingford Gloss 814/5091 için çevrimiçi göz atın veya pdf Montaj Talimatları Kılavuzu indirin. Argos Hallingford Gloss 814/5091 16 sayfaları. 3 drawer bedside
Sayfayı Yazdır
Assembly Instructions
Step 16
Fit the 4 plastic nails
Tap 2 plastic nails
J
into the bottom edge of
each of the sides
6
.
.
7
Carefully stand the
unit up for the next
step.
Step 17
Secure the unit to a
wall
a:
Before fitting the unit
to a wall, use a spirit
level to check the top of
the unit is level,
front-to-back and
side-to-side in the 3
positions shown.
Use suitable packing
pieces (not supplied) to
make the unit level.
To prevent possible
overbalancing this unit
must be secured to a
suitable wall by fitting the
overbalance protector kit
.
to a wall.
N
b:
Push the unit up
against the wall and slide
the bracket against the
wall. Fit the 2nd screw
into the underside of the
top panel.
Mark the slot at the back
of the bracket for drilling
into the wall.
Wall fixings are not
supplied as they will need
to suit the wall type.
J
and
J
In order to prevent overturning
this product must be used with the
wall attachment device provided
b:
7
J
6
J
WARNING!
a:
Top
N
Back
See the next page for a guide
to wall mounting and fixings
N
Top
N
Note: Take care when
drilling the wall that you
do not drill into any
pipes, wires etc.
If in doubt, consult an
expert.
10