Cisco IOS Router Başlangıç Kılavuzu - Sayfa 6

Ağ Geçidi Cisco IOS Router için çevrimiçi göz atın veya pdf Başlangıç Kılavuzu indirin. Cisco IOS Router 12 sayfaları. Siemens hipath 4000 release 1 and siemens hicom 330e release 3.1 to cisco ios voice gateway using e1 qsig with h.323
Ayrıca Cisco IOS Router için: Ürün Bilgileri (11 sayfalar), Uygulama Notu (41 sayfalar)

Sayfayı Yazdır

Step 4.4 Configure Cisco IOS IPS to use the default basic signature set:

training(config)#ip ips signature-category

training(config-ips-category)# category all

training (config-ips-category-action)# retired true

training (config-ips-category-action)# exit

training(config-ips-category)# category ios_ips basic

training (config-ips-category-action)# retired false

training (config-ips-category-action)# exit

training(config-ips-category)# exit

Do you want to accept these changes? [confirm]y

training(config)#

Step 4.5 Enable IPS rule on the desired interface and direction:

interface <interface name>

ip ips <rule name> <in | out>

training(config)#interface vlan 1

training(config-if)#ip ips myips in

training(config-if)#exit

training(config)#exit

training#

Additional Commands and References

Cisco IOS IPS Configuration Guide:

http://www.cisco.com/en/US/products/ps6441/products_feature_guide09186a0080747eb0.html

5 Loading Signatures to Cisco IOS IPS

The last step is to load the signatures into Cisco IOS IPS. In the following example, we start a

TFTP server on the PC and put the Cisco IOS IPS signature package under the TFTP directory.

Please refer to the Additional Commands and References section for more about TFTP servers

and alternative methods of loading Cisco IOS IPS signatures.

If using a Telnet session, turn on the terminal monitor to view the console output.

training#terminal monitor

Step 5.1 Save your router configuration.

training#copy running-config startup-config

Destination filename [startup-config]?

Building configuration...

[OK]

White Paper

Page 6 of 12