Cisco VG202 Yazılım Yapılandırma Kılavuzu - Sayfa 13

Ağ Geçidi Cisco VG202 için çevrimiçi göz atın veya pdf Yazılım Yapılandırma Kılavuzu indirin. Cisco VG202 50 sayfaları. Voice gateways
Ayrıca Cisco VG202 için: Donanım Kurulum Kılavuzu (50 sayfalar), Manuel (10 sayfalar), Donanım Kurulum Kılavuzu (48 sayfalar), Hızlı Başlangıç Kılavuzu (19 sayfalar)

Chapter 1

Understanding Interface Numbering and Cisco IOS Software Basics

Where to Go Next

Now that you have learned some Cisco IOS software basics and seen a typical deployment scenario, you

can begin to configure the VG by using the command-line interface (CLI).

Remember that:

•

Go to

OL-16191-01

You can use the question mark (?) and arrow keys to help you enter commands.

Each command mode restricts you to a set of commands. If you have difficulty entering a command,

check the prompt and then enter the question mark (?) for a list of available commands. You might

be in the wrong command mode or be using the wrong syntax.

To disable a feature, generally enter the keyword no before the command; for example, no ip

routing.

You need to save your configuration changes to NVRAM so that the changes are not lost if there is

a system reload or power outage.

Chapter 2, "Using the setup Command Facility,"

Cisco VG202 and Cisco VG204 Voice Gateways Software Configuration Guide

to begin configuring the VG.

Where to Go Next

1-7