Cisco VG202 Donanım Kurulum Kılavuzu - Sayfa 42
Ağ Geçidi Cisco VG202 için çevrimiçi göz atın veya pdf Donanım Kurulum Kılavuzu indirin. Cisco VG202 48 sayfaları. Voice gateways
Ayrıca Cisco VG202 için: Yazılım Yapılandırma Kılavuzu (50 sayfalar), Donanım Kurulum Kılavuzu (50 sayfalar), Manuel (10 sayfalar), Hızlı Başlangıç Kılavuzu (19 sayfalar)
Sayfayı Yazdır
Performing the Initial Configuration
...
Copyright (c) 2013 by Cisco Systems, Inc.
Compiled <date> <time> by <person>
Press Return to bring up the voice gateway prompt:
Step 4
...
flashfs[4]: Initialization complete.
VG>
Enter privileged EXEC mode:
Step 5
VG> enable
VG#
Note
Performing the Initial Configuration
You initially configure your voice gateway by using the Cisco IOS CLI. Then you use the setup command
which guides you through the configuration process by prompting you for the specific information that
is needed to configure your system. After creating the initial configuration file, you can use the
Cisco IOS CLI to perform further configuration.
•
•
•
Using the Cisco IOS CLI to Configure the Voice Gateway
Procedure
Set up a console connection to your voice gateway.
Step 1
The system displays the following message:
...
voice gateway con0 is now available
Press Return or Enter.
Step 2
The system displays the following message:
Cisco Configuration Professional Express (Cisco CP Express) is installed on this device.
This feature requires the one-time use of the username "cisco"
with the password "cisco." The default username and password have a privilege level of 15.
Please change these publicly known initial credentials using Cisco CP Express or the Cisco
IOS CLI.
Cisco VG202, Cisco VG202XM, Cisco VG204, and Cisco VG204XM Voice Gateways Hardware Installation Guide
4-2
If the
prompt appears, your system has booted in ROM monitor mode. For
rommon 1>
information on the ROM monitor, see the voice gateway rebooting and ROM monitor
information in the
Cisco IOS Configuration Fundamentals Configuration Guide
Cisco IOS software release.
Using the Cisco IOS CLI to Configure the Voice Gateway, page 4-2
Using the setup Command to Configure the Voice Gateway, page 4-3
Verifying and Saving Your Configuration, page 4-5
Chapter 4
Powering On the Voice Gateway and Performing the Initial Configuration
for your
OL-15959-01