Epson Perfection V700 Series Kullanıcı Kılavuzu - Sayfa 5

Tarayıcı Epson Perfection V700 Series için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Epson Perfection V700 Series 11 sayfaları. Photo
Ayrıca Epson Perfection V700 Series için: Teknik Özellikler (4 sayfalar), Şartname Sayfası (2 sayfalar), Bildirimler ve Garanti (13 sayfalar), Hızlı Başlangıç (4 sayfalar), Qucik Start (1 sayfalar), Ürün Destek Bülteni (23 sayfalar), Güncelleme (1 sayfalar), Ürün Destek Bülteni (40 sayfalar), Ürün Destek Bülteni (24 sayfalar), Ürün Destek Bülteni (29 sayfalar), Ürün Destek Bülteni (8 sayfalar), Ürün Destek Bülteni (3 sayfalar), Ürün Destek Bülteni (11 sayfalar), Ürün Destek Bülteni (14 sayfalar), Ürün Destek Bülteni (40 sayfalar), Ürün Destek Bülteni (11 sayfalar), Ürün Destek Bülteni (40 sayfalar), Ürün Destek Bülteni (22 sayfalar), Ürün Destek Bülteni (12 sayfalar), Ürün Destek Bülteni (21 sayfalar), Ürün Destek Bülteni (5 sayfalar), Ürün Destek Bülteni (12 sayfalar), Hızlı Başlangıç (2 sayfalar), Menzil Kılavuzu (7 sayfalar), Kullanıcı Kılavuzu (2 sayfalar)

3. Use a soft cloth to wipe the transparency unit window and

the document table before placing your film or slides.

To place film or slides for scanning, see the sections below.

Placing Film in the Holder

Placing 35mm Film Strips

1. Remove the film strip cover(s) on the film holder.

2. Slide up to four film strips all the way into the film holder

with the shiny base side facing down. Your images and any

wording on the film strips should appear backwards on the

side that faces up, as shown by the illustration on the film

holder.

Note: Hold the edge of the film gently or use gloves to touch the

film; otherwise you may damage the film. Make sure the white

stickers on the back of the film holder and the areas around them

are not scratched, dusty, or covered in any way. If the areas are

obscured, the scanner may have trouble recognizing your film in

Full Auto Mode. Do not cover any of the tiny holes in the film

holder or the scanner may have trouble recognizing which film

holder you are using.

Epson Perfection V700 Photo/V750 Pro

3. Place the cover(s) over the film and press them down until

they click. Then press down on all the edges of the covers to

secure them.

4. Place the film holder on the document table so that it is

aligned with the upper right corner and the pins are seated

in the holes on the scanner.

5. Make sure you removed the document mat. See "Removing

the Document Mat" on page 4.

6. Close the scanner cover.

When you are finished scanning film, be sure to replace the

document mat before scanning documents or photos. See

"Replacing the Document Mat" on page 9.

Placing Medium Format Film

1. Open the cover on the medium format film holder.

2. Slide up to two medium format film images into the film

holder with the shiny base side facing down. Your images

and any wording on the film should appear backwards on

12/05

Epson Perfection V700 Photo/V750 Pro - 5