Cisco VG400 series Yükleme - Sayfa 4

Ağ Geçidi Cisco VG400 series için çevrimiçi göz atın veya pdf Yükleme indirin. Cisco VG400 series 13 sayfaları. Voice gateway
Ayrıca Cisco VG400 series için: Donanım Kurulum Kılavuzu (40 sayfalar), Yazılım Yapılandırma Kılavuzu (22 sayfalar)

Sayfayı Yazdır

Attach Cisco VG400 Voice Gateway Chassis to Wall

Caution

Do not place anything on top of the hardware that weighs more than 5 lbs. or applies a point load of greater

than 1 lbs. Excessive weight damages the chassis. Additionally, do not stack other electronic equipment on

top of the hardware so as not to impede or interfere with the cooling mechanisms.

Warning

To prevent airflow restriction, allow clearance around the ventilation openings to be at least 1 inch (2.54cms).

Statement 1076.

After you install the voice gateway, you must connect the chassis to a reliable earth ground. For the chassis

ground connection procedures, see the Chassis Grounding section.

Attach Cisco VG400 Voice Gateway Chassis to Wall

Step 1

Attach the voice gateway chassis to the wall by using the fasteners.

The fasteners that you use must support the weight of the VG400 Voice Gateway.

Note

The head diameter of the fasteners should be sized to fit in the key slot on the chassis bottom. The maximum

diameter of the fastener head should not exceed .250" and the maximum shank diameter should not exceed

.130".

You must adjust the fastener to allow for the head of the fastener insert into the key slot.

Caution

Your chassis installation must allow unrestricted airflow for chassis cooling.

Step 2

Attach the voice gateway to as shown in the following image.

Note

If you prefer, you can also install the voice gateway diagonally using the other two sides.

Installing the Cisco VG400 Voice Gateway