Digiview PC06 Kullanıcı Kılavuzu - Sayfa 2

Çalar Saat Digiview PC06 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Digiview PC06 2 sayfaları. Projection sport alarm clock with chime

Sayfayı Yazdır

TIME PROJECTION

The Sport Alarm Clock can project the time display for a

short period when operating on batteries, or continuously

when using the AC/DC adapter. The clock is designed to

project the time image on the ceiling in red, no focusing

is required.

PC04

PC06

PC07

NOTE: Time display on the ceiling and the time on

the LCD display cannot be viewed simultaneously, as

their viewing directions are opposite. Place the unit at

the head of your bed to view the projected image

correctly.

SETTING THE CLOCK

TIME AND DATE

After batteries are installed as shown inside the battery

compartment, the default time will be displayed as "1:00"

To set current date and time:

1). Press SET button 4 times, and the

MONTH will be displayed as "1".

2). Press MODE button to set the

current month.

3). Press SET button and the DAY

will be displayed.

4). Press MODE button to set the

current day.

5). Press SET button again and the

HOUR will be displayed as 1: A.

6). Press MODE button to set current

hour (AM, 24 hour, PM).

7). Press SET button and the

MINUTES will be displayed.

8). Press MODE button to set the

correct minute.

9). Press SET button to complete setting the month,

date, hour and minute.

10). Press MODE button to return clock to normal

operation.

24 HOUR TIME FORMAT

Press MODE button until the desired hour in "24 hour"

format is shown. To return to "12 hour" format continue

pressing MODE.

CURRENT TIME PROJECTION

Press "LIGHT/SNOOZE" button to turn on the LCD

backlight and project the time display onto the wall or

the ceiling for 3 seconds.

CONTINUOUS TIME PROJECTION

Connect AC/DC adapter (optional) to project the time

display continuously.

CALENDAR AND CLOCK DISPLAY MODES

The Alarm Clock has a three (3) display modes:

TIME, DATE and ALARM

The current time is displayed in hour-minutes format

which is the default display mode. The date is displayed

in month-date format.

The alarm time is displayed in hour-minutes format.

ALARM

If the alarm is activated, it will sound at the set time and

the (bell icon) will flash.

To review the alarm time, press MODE button once in

TIME display and the default alarm time will be

displayed as "1:00" and "ALARM" will be displayed in

the top left of the LCD display.

To review the date, press MODE button when the

ALARM TIME is displayed.

When MODE is pressed again the seconds will be

displayed.

To return to the TIME display, press MODE button

again or wait for it to change back.

TO SET ALARM TIME

Press SET button twice in TIME

display. If the alarm is being set for

the first time, "1:A" will be displayed

with flashing, and "ALARM" will

display in the top left.

Press MODE button to adjust the

desired alarm HOUR.

Press SET button to set the desired

alarm MINUTES, the alarm minutes

"00"will flash.

Press MODE button to adjust the

desired alarm minutes.

Press SET button again to confirm set alarm time.

The clock will return to the TIME display mode.

ENABLE OR DISABLE ALARM AND CHIME

• Press SET button in TIME display mode. Alarm hour

and minute digits will flash.

• Press MODE button to enable or disable the alarm and

chime in the following sequence:

ALARM ON-

ALARM&CHIMEON-

CHIME ON-

ALARM&CHIME OFF -

ALARM ON-

• Press SET button to confirm the

alarm and chime status. Clock will

go into TIME and DATE set mode. Wait and clock will

return to TIME display mode.

TO STOP ALARM

To stop the alarm for 24 hours, press SET when alarm

is activated.

To stop alarm for 5 minutes, press SNOOZE/LIGHT

button

If no button is pressed, alarm will stop in 2 minutes.

Press MODE button to disable the alarm in ALARM

display format while alarm time digits are flashing.

(The bell icon will disappear from the display when

alarm is disabled).

CHIME

When CHIME is activated, it will sound at every hour.

STANDARD WARRANTY INFORMATION

This product is warranted from the manufacturing defects

for one year from date of retail purchase. It does not

cover damages or wear resulting from accident, misuse,

abuse, commercial use, or unauthorized adjustment and/

or repair.

Note that online product registration is required to ensure

valid warranty protection.

To register your product, go to our Company website at:

www.digiviewtime.us. Click Online Product Registration

under the Customer Service menu.

Should you require assistance with this product and its

operation, please contact our Customer Service Hotline

1(866) 443 3543

Please direct all returns to the place of the original

purchase. Should this not be possible, contact Customer

Service Hotline for assistance and to obtain a Return

Merchandise Authorization (RMA). Returns without a

return authorization will be refused. Please retain your

original receipt as you may be asked to provide a copy

for proof of purchase.

Hideki Electronics, Inc. reserves the right to repair or

replace the product at our option.

PRECAUTIONS

This product is engineered to give you years of

satisfactory service if handled carefully.

Here are a few precautions:

1. Do not immerse the unit in water.

2. Do not clean the unit with abrasive or corrosive

materials. They may scratch the plastic parts and

corrode the electronic circuits.

3. Do not subject the product to excessive force, shock,

dust, temperature, or humidity, which may result in

malfunctions, shorter lifespan, damaged batteries,

and damaged parts.

4. Do not tamper with the unit's internal components.

Doing so will invalidate the warranty and may cause

damage. This unit contains no user-serviceable parts.

5. Use only fresh batteries. Do not mix new and old

batteries.

6. Read the user's manual thoroughly before operating

the unit.

SPECIFICATIONS

Projection

Current time display projected onto the ceiling or wall

Fixed red display projection

Calendar and Clock

12/24 hour display in hh : mm format

Date Format: Month - Day format

Single 2-minute crescendo alarm with snooze and chime

LED backlight

Power

2 AAA batteries (not included)

AC/DC Adapter (3V, 100mA),

center pin positive (optional)

Dimensions

4.33 (L) x 4.72 (H) x 4.33 (D) inches