Digiview RC304EL Kullanıcı Kılavuzu - Sayfa 2

Çalar Saat Digiview RC304EL için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Digiview RC304EL 8 sayfaları. Multi-band atomic travel clock with temperature

Sayfayı Yazdır

Display Setting

• Date format: in the main display, press
to choose between
dd/mm or mm/dd format
• GMT (Greenwich Mean Time) time zone:
* Please refer to the world time zone map to find out your time zone.
* Set your time zone as detailed in the section "Time Zone <ZO>".
* In the main display, press SET button to turn the setting on.
* "UT" will appear on the screen.

World Time Zone Map

( + )
-9
-8
-7
-6
-5
-4
-3
-2
-1
0
+1 +2+3 +4 +5
Helsinki
London
-10
Moscow
Frankfurt
Vancouver
Paris
-3:30
Toronto
Zurich
Boston
San Francisco
Chicago
Rome
New York
Athens
Los Angeles
+3:30 +4:30
Miami
Cairo
Honolulu
Mexico City
Panama
Rio de Janeiro
Santiago
-11
-10
-9
-8
-7
-6
-5
-4
-3
-2 -1
0
+1 +2
+3
+4
5
Alarm <AL>
To set alarm time:
• Press
to select ALARM 1 or ALARM 2.
• Press SET button and hold until the display flashes.
• Press
or
to change setting.
• Keep holding
or
for fast adjustment.
• Confirm your setting by pressing SET button.
• Press
to turn the alarm "ON".
• The
icon will appear on the main display.
• The alarm will go off at the set time.

To deactivate the alarm:

• Press
to select ALARM 1 or ALARM 2.
• Press
to turn the alarm "OFF".
• The
icon will disappear from the main display.
When the ALARM is beeping:
• Press SNOOZE/LIGHT button. The alarm tone will stop and then start
again after 4 minutes. This can repeat up to eleven times.
• To cancel snooze, press any button other than SNOOZE/LIGHT button.
• When snooze is on, the
icon will blink.
• Press any button other than SNOOZE/LIGHT button to stop the
alarm tone.
• If you do not stop the alarm tone, it will stop automatically after
3 minutes.
Unless deactivated, the alarm will remain active and go off again
at the set time.
7

Main Display

( - )
+6
+7 +8 +9
+10 +11
+12 -11
In the main display, press MODE button to access the six different
function modes:
1 Alarm mode (AL) -- dual alarms with snooze feature
Beijing
Tokyo
Seoul
2 Date reminder mode (DR) -- gives alert on the set date
Taipei
+5:30
Hong Kong
Bombay
3 Time zone mode (ZO) -- time zone and daylight saving time
Manila
Bangkok
Kuala Lumpur
Singapore
4 Stopwatch mode (SP) -- lap mode and split mode
Jakarta
5 Reception mode (RX)
+9:30
Sydney
Perth
6 Reception information (RI)
Melbourne
Auckland
Notes : In case no adjustment is made in 10 seconds, clock will return to
+5
+6 +7 +8
+9 +10 +11 +12 -11
the main display time mode. You have to confirm the desired setting in
20 seconds. Otherwise, your desired setting will be ignored and fail to
replace the previous setting.
Date reminder <DR>
To set reminder date:
• Press SET button and hold until the display flashes.
• Press
or
• Confirm your setting by pressing SET button.
• Press
to turn the reminder "ON".
• The "DR" sign will appear on the main display.
• The "DR" sign will blink for a whole day on the set date.
To deactivate the reminder:
• Press
to turn the reminder "OFF".
• The "DR" sign will disappear from the main display.
Time zone <ZO>
• Press SET button and hold until the display flashes.
• Press
or
(range: +/- 12 hours, deviation in hours only).
If radio controlled time received from JJY60 is 3:00 pm (Japan time),
and the time zone set is +8 hours (Hong Kong time zone), then the local
time display will be 2:00 pm.
• Set Daylight Saving Time (DST):
Press MODE button once.
"DS" will appear on the display.
Press
to turn the function "ON", "OFF" or "Auto".
If DST is on or auto, the clock will automatically tune to the
Daylight Saving Time in spring and fall. In case DST does not apply
in your locality, please turn it off.
• Press SET button to confirm setting.
f
a. Time
b. Date
c. Indoor temperature
a
d. Weekday indicator
c
e. Date reminder icon
d
f. Alarm icon
b
e
6
to change setting.
to change setting
8