Digiview RC305EL Kullanıcı Kılavuzu - Sayfa 2

Saat Digiview RC305EL için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Digiview RC305EL 5 sayfaları. International travel clock

Sayfayı Yazdır

* Major country band pre-set

* Calendar displaying date with month

* User-selectable calendar format

* Indoor Temperature display in Celsius or Fahrenheit

* User-selectable 12 or 24 hour time format

* Day of the week display in English, German, French,

Italian, Spanish or Dutch

* Dual crescendo alarm with snooze

* Daylight Savings Time manual adjustment

* Enhanced Orange Backlight

* Low Battery Indicator

* Keyboard interlock

* Folded travel size or opened for desktop view

FRONT VIEW

A. MULTI-BAND ATOMIC TIME CLOCK

WITH INDOOR TEMPERATURE

B. ALARM BUTTON

* Allows toggling between CLOCK and ALARM

display modes

* Enables or disables WEEKLY or SINGLE alarm

TOP VIEW

•

SNOOZE

LIGHT

G. UP (+) BUTTON

* Increases all function parameters

* Selects the date display format (date-month or

month-date)

* Activates Single or Weekly Alarm in ALARM

mode

H. DOWN (–) BUTTON

* Decreases all function parameters

* Sets the language for the day of the week

* Activates the atomic time receiver

* Enables or disables any of the alarms

I. LOCK SWITCH

* Locks all operation buttons while traveling

preventing the battery drain

J. SNOOZE/LIGHT BUTTON

* Activates snooze function and EL backlight

REAR VIEW

C. MODE BUTTON

* Allows toggling between different display modes

(TIME, DST SETUP, TIME ZONE

ADJUSTMENT, RECEPTION MODE

SELECTION)

D. C°/F° BUTTON

* Selects the Indoor temperature display format in

Celsius or Fahrenheit.

E. BATTERY COMPARTMENT

*Accommodates one (1) CR2032 button battery.

F. UNFOLDING TABLE STAND SUPPORT

* Keeps the unit in an upright position on a flat surface.

ALL SEGMENTS DISPLAY OVERVIEW

a. Time with seconds

b. Date in month/date or date/month format

c. Indoor temperature in °C or °F

d. RF reception type icon

e. Single Alarm icon

f. Weekly Alarm icon

g. Key lock indicator

h. RF reception strength indicator

i. Low battery indicator icon

GETTING STARTED

BATTERY INSTALLATION

* Open the battery compartment door.

* Install one CR2032 (3V) button battery matching the

polarity as shown in the battery compartment.

* Replace the battery compartment door.

ATOMIC TIME RECEPTION

Immediately after the battery installation, the clock will

beep once and display all available segments. Then the

unit's receiver will start to automatically scan for any

available Atomic Time signal.

If the synchronization with the Atomic Clock time

signal is successful, the relevant world region will be

underlined and stay visible on the display.