Epson Stylus Photo RX600 Ürün Bilgileri - Sayfa 17

Tarayıcı Epson Stylus Photo RX600 için çevrimiçi göz atın veya pdf Ürün Bilgileri indirin. Epson Stylus Photo RX600 19 sayfaları. Product support bulletin(s)
Ayrıca Epson Stylus Photo RX600 için: İpuçları (2 sayfalar), Ürün Bilgi Formu (4 sayfalar), Broşür (2 sayfalar), Kurulum Kılavuzu (2 sayfalar), Buradan Başlayın Kılavuzu (10 sayfalar), Hızlı Başlangıç Kılavuzu (28 sayfalar), Kullanıcı Kılavuzu (12 sayfalar), Güncelleme (1 sayfalar), Ürün Destek Bülteni (6 sayfalar), Ürün Destek Bülteni (1 sayfalar), Teknik Özellikler (2 sayfalar), Nasıl Kopyalanır ve Yazdırılır (20 sayfalar), Eğitim Kılavuzu (4 sayfalar)

Sayfayı Yazdır

5. On the test page, select the pattern in each row with the two

vertical lines most precisely printed on top of each other.

You may need to use a magnifying glass or loupe.

Select the number of the best pattern for each row by

pressing the l and r buttons. Then press

6. The next pattern number appears. Repeat step 6 for each of

the remaining alignment patterns.

7. When you're finished you see the message

on the LCD screen. Press

completed

Setup Menu.

Transporting the RX600

If you move your RX600 some distance, you need to prepare

it for transportation in its original box or one of a similar size.

Caution:

To avoid damage, always leave the ink cartridges installed when

transporting the RX600. Never transport or store the RX600 on its

side or in a tilted or upside-down position.

1. Press the P

button to turn on the RX600. Wait until

the scanner carriage moves to the home position (toward

the left side) and the print head locks in the far right

position. Then turn the RX600 off.

Head alignment

to return to the

2/04

Epson Stylus Photo RX600

2. Open the scanner lid and slide the transportation lock to

the

locked position.

Caution:

Be sure to move the transportation lock back to the unlocked

position after installing the RX600 in its new location.

3. Close the scanner lid.

4. Unplug the power cord from the electrical outlet. Then

disconnect the USB cable from your computer.

5. Unplug the cord from the

6. Remove any paper from the sheet feeder and output tray,

then remove the paper support.

7. Close the output tray.

8. Lift up the scanner unit.

9. Remove the orange print head lock from its storage area and

install it as shown to prevent the print head from moving

during transport. If you can't find the orange print head

lock, tape the print head to the case.

Caution:

Be sure to remove the orange print head lock or tape after

installing the RX600 in its new location.

connector.

TPU

Epson Stylus Photo RX600

- 17